Scooter Spare Parts



Apex Scooter Bar Riser Spacer Raw 10mm

Grizzly Griptape perforated Griptape to avoid air bubbles when gripping your board and Sticky adhesive that won't peal in extreme heat or cold.

Envy IHC To HIC Conversion Shim

Envy IHC To HIC Conversion Shim

$3.99
RRP $4.99
SAVE $1.00 (20%)
Envy Scooter HIC Kit For SCS And HIC Forks

Envy Scooter HIC Kit For SCS And HIC Forks

$9.99
RRP $10.99
SAVE $1.00 (9%)
Envy Scooter SCS Bar Adapter Oversized 34.9mm Bars

Envy Scooter SCS Bar Adapter Oversized 34.9mm Bars

$9.99
RRP $12.99
SAVE $3.00 (23%)

The lightest and strongest SCS clamp on the market! No quality has been sacrificed in the carving of the Awakening clamp. This clamp is designed to fit standard 31.8mm bars. Crafted from heat treated 6082 aluminium this clamp boasts superior strength for even the hardest riders. Equipped with high tensile bolts and laser decal. Available in 3 classic Awakening colours.

This is a lightweight clamp, we recommend you use this SCS with bars up to 620mm tall, if you require clamp for bigger bars we recommend the Flavor Aesthetic SCS Clamp.

Envy Scooter SCS Bar Adapter Standard 31.8mm Bars

Envy Scooter SCS Bar Adapter Standard 31.8mm Bars

$9.99
RRP $12.99
SAVE $3.00 (23%)

The best grips money can buy!

Technical specifications :

- Lenght : 170 mm
- Diameter : 33 mm
- Silicon bar ends
- Weight : 150 g

Envy Scooter Wheel Spacers 30mm

Envy Scooter Wheel Spacers 30mm

$3.99
RRP $4.99
SAVE $1.00 (20%)
Ethic Ics Compression Screw 6mm

Ethic Ics Compression Screw 6mm

$2.99
RRP $9.99
SAVE $7.00 (70%)
Root Industries IHC To HIC Conversion Kit

Specifications of the Native Advent Deck:

Measurements are taken from a 23 inch long version - Please subtract 1 or 2 inches for 22 and 21 in any length measurements regarding length.
Length: 585mm / 23 inches
Footspace: 437mm / 17.2 inches
Wheelbase: 660mm / 25.9 inches
Crookspace: 50mm / 1.9 inches
Width: 140mm / 5.5 inches
Weight of deck: 1800 grams
Weight of fender: 110 grams
Weight of axle and deck ends: 80 grams
Total weight all included: 1990 grams
(this weight is for the longest widest version)
Headtube Angle: 83 degrees

NATIVE has been hard at work on the Advent II and the time has finally come.

Every millimetre of this deck has been reviewed and recalibrated from the thickness of the front of the downtube to the thickness of the vertical walls that the axle goes through.

The downtube-to-deck configuration was chosen after over 10 different combinations were tested by a wide spectrum of riders within and outside of NATIVE's direct team/family.

Zero cracks on the chosen configuration was the desired and achieved result through intense riding and stress testing.

The crook groove on the Advent II is now curved and creates a perfect lock-in point to help you learn and hold crook grinds.

NATIVE have kept the flat sides and flat bottom but increased the radius of the curve on the bottom corner of the Advent II to give you even smoother boardslides.

The concave has been sufficiently increased creating an incredible foot hugging experience for the rider.

NATIVE's Advent II comes with Loc-Fast Deck Ends featuring an integrated thread keeping the Deck Ends tubular for superior 5.0’s and the ability to rotate as needed.

Loc-Fast Deck Ends only need a 6mm allen key to tighten and loosen.

The Advent II is the only scooter deck created that accommodates all industry standard wheels and comes with all 3 sets of spacers to do so.

The NATIVE Omni Fender comes on all Advent II Decks.

The Omni Fender fits anything from standard wheels to 30mm wide/125mm diameter wheels.

The unique fastening channel system below allows you slide the Omni Fender as close as possible to whatever wheel you choose to run so you have maximum foot room.

Want even more foot room? Simply don’t like fenders? That’s cool, half of the NATIVE team don’t run fenders either! You can remove the Omni Fender from the Advent

Deck without it affecting the Advent Decks back end spacer system.

Root Industries Scooter Bar Riser Spacer Blue 5mm

Root Industries Scooter Bar Riser Spacer Blue 5mm

$3.99
RRP $4.99
SAVE $1.00 (20%)
Root Industries Scooter Bar Riser Spacer Gold 5mm

Root Industries Scooter Bar Riser Spacer Gold 5mm

$3.99
RRP $4.99
SAVE $1.00 (20%)
Root Industries Scooter Bar Riser Spacer Green 5mm

Root Industries Scooter Bar Riser Spacer Green 5mm

$3.99
RRP $4.99
SAVE $1.00 (20%)
Root Industries Scooter Bar Riser Spacer Purple 5mm

Root Industries Scooter Bar Riser Spacer Purple 5mm

$3.99
RRP $4.99
SAVE $1.00 (20%)
Root Industries Scooter Bar Riser Spacer Red 5mm

Root Industries Scooter Bar Riser Spacer Red 5mm

$3.99
RRP $4.99
SAVE $1.00 (20%)
Root Industries SCS Bar Adapter For HIC Bars (Oversized)

Root Industries SCS Bar Adapter For HIC Bars (Oversized)

$9.99
RRP $12.99
SAVE $3.00 (23%)

These Forks are for use with SCS and feature a debossed NATIVE Emblem front and centre.
Stem is the result of extensive and brutal testing in the streets to develop a whole new range from the ground up specifically for the younger (and often smaller) upcoming street riders that we believe are integral to the future of NATIVE and Scootering as a whole.

Specifications of the Native Stem Fork:

- Weight:  342 grams
- Material: 6061-T6 Aluminium
- Steer tube length: 150mm
- Offset: 10mm
- Internal thread: M8
- Max. wheel diameter: 130mm
- Axle diameter: 8mm / 12mm  
- Compression: HIC / SCS
- Fits up to 115mm Diameter Wheels x 24mm Wide

Root Industries SCS Bar Adapter For IHC Bars (Standard)

Root Industries SCS Bar Adapter For IHC Bars (Standard)

$9.99
RRP $12.99
SAVE $3.00 (23%)