SKATEBOARDS
ACCESSORIES
APPAREL
FOOTWEAR
PROTECTION
SCOOTERS
Brands
Penny Nickel Skateboard Complete 27 Blackout
.png)
Free Shipping Australia Wide Orders Over $99This Penny 27" Features:
- Matched with 4” powder-coated Penny trucks
- 59mm 83A super smooth Penny wheels
- colour coded high tensile bolts and Penny
- Abec 7 bearings.
KICK PUSH are an authorised Penny retailer.
90 Day Returns Money Back Guarantee Afterpay & Zip Pay Shop Now, Take Now, Pay Later World Wide Shipping NZ, USA, Canada, UK, Europe, ASIA + More(PENNICKBLACKOUT)
SHIPPING COSTS
AUSTRALIA
FREE SHIPPING on all orders over $49 (or $10 under $49).
$15 EXPRESS POST flat rate per order
NEW ZEALAND EXPRESS COURIER
$15 FLAT RATE or FREE SHIPPING on all orders over $99.
WORLDWIDE EXPRESS COURIER
$30 to USA/Canada/Asia and $60 to rest of the world.
All orders are dispatched promptly after you place your order.
ESTIMATED DELIVERY TIMES
Delivery times below may be affected by delays due to Covid situation.
NSW - 1 to 4 working days ACT - 1 to 4 working days QLD - 1 to 4 working days VIC - 2 to 5 working days SA - 2 to 6 working days WA - 5 to 8 working days NT - 5 to 9 working days TAS - 5 to 9 working days NZ - 2 to 4 working days ASIA - 2 to 6 working days USA - 3 to 7 working days UK - 4 to 8 working days EURO - 4 to 8 working days
PAYMENT INFO
All payments are secure and protected by our sitewide HTTPS. We accept following payment methods; PayPal Visa MasterCard American Express Apple Pay Google Pay Afterpay - Buy Now Pay Later ZipPay - Buy Now Pay LaterOthers Also Bought
This Penny 27" Features:
- Matched with 4” powder-coated Penny trucks
- 59mm 83A super smooth Penny wheels
- colour coded high tensile bolts and Penny
- Abec 7 bearings.
KICK PUSH are an authorised Penny retailer.
New for 2016.
This Penny 22”
Features:
- Matched with 3” powder-coated Penny trucks
- 59mm 78A super smooth Penny wheels
- colour coded high tensile bolts and Penny
- Abec 7 bearings.
KICK PUSH are an authorised Penny retailer.
Completely assembled and ready to ride.
Awesome smooth high quality skateboards from OBFIVE
Suitable from beginner to advanced.
Features:
- Exotic walnut veneer
- 5” OBfive trucks
- 14mm riser pads
- 65mm 78A wheels
- Abec 7 chrome bearings
- Printed graphic grip tape
- Length 28” x width 8”
This Penny 27" Features:
- Matched with 4” powder-coated Penny trucks
- 59mm 83A super smooth Penny wheels
- colour coded high tensile bolts and Penny
- Abec 7 bearings.
KICK PUSH are an authorised Penny retailer.
This Penny 27" Features:
- Matched with 4” powder-coated Penny trucks
- 59mm 83A super smooth Penny wheels
- colour coded high tensile bolts and Penny
- Abec 7 bearings.
KICK PUSH are an authorised Penny retailer.
More From This Category
3.5" Inch sticker
Colour : Blue
We Also Recommend
Santa Cruz Skateboards was founded in 1973 by Rich Novak, Doug Haut and Jay Shuirman. Santa Cruz also employed legendary artist Jim Phillips to create most of the brands early graphics, most notably their iconic "Screaming Hand" graphic. As one of the oldest skateboard brands in existence, Santa Cruz draws from a wealth of experience in skateboarding to bring you a range of top-quality boards. Along with their trademark line, Santa Cruz also offers a broad range of boards in varying shapes and sizes.
| WIDTH | LENGTH | WHEELBASE |
Key Features:
Total Scooter Height: 800mm
Suggested Ages: 6-12 Years
Bars Spins 360 Degrees for Tricks
Total Scooter Weight: 3.6kgs
Scooter Type: Fixed 1 piece Stunt Scooter that's not foldable, with fixed handlebar size (can but cut down after purchase)
Scooter come pre-dialled, 95% built, all that's needed to do is put the bars on, tighten then clamp then you're off
Specification:
Deck: 6061-T6, 110mm x 495mm (4.3 x 19.5”) with front and rear angled deck inserts.
Headset: Slim stack IHC head set.
Brake: Invert V3 Steel pressed underside bolt.
Bars: Hi Ten steel “T” bar (H)580 x (W)520mm.
Grips: Invert 165mm TPR 25A With TPE bar ends.
Clamp: 2 bolt 6061-T6 Aluminium.
Fork: Invert V3 reinforced steel with cut outs 120mm wheel compatible.
Wheel: Polycarbonate hollow core.
PU: 110mm, 86a Poly Urethane.
Bearing: ABEC 7 chrome steel.
Santa Cruz Skateboards was founded in 1973 by Rich Novak, Doug Haut and Jay Shuirman. Santa Cruz also employed legendary artist Jim Phillips to create most of the brands early graphics, most notably their iconic "Screaming Hand" graphic. As one of the oldest skateboard brands in existence, Santa Cruz draws from a wealth of experience in skateboarding to bring you a range of top-quality boards. Along with their trademark line, Santa Cruz also offers a broad range of boards in varying shapes and sizes.
| WIDTH | LENGTH | WHEELBASE |
Key Features:
Total Scooter Height: 800mm
Suggested Ages: 6-12 Years
Bars Spins 360 Degrees for Tricks
Total Scooter Weight: 3.6kgs
Scooter Type: Fixed 1 piece Stunt Scooter that's not foldable, with fixed handlebar size (can but cut down after purchase)
Scooter come pre-dialled, 95% built, all that's needed to do is put the bars on, tighten then clamp then you're off
Specification:
Deck: 6061-T6, 110mm x 495mm (4.3 x 19.5”) with front and rear angled deck inserts.
Headset: Slim stack IHC head set.
Brake: Invert V3 Steel pressed underside bolt.
Bars: Hi Ten steel “T” bar (H)580 x (W)520mm.
Grips: Invert 165mm TPR 25A With TPE bar ends.
Clamp: 2 bolt 6061-T6 Aluminium.
Fork: Invert V3 reinforced steel with cut outs 120mm wheel compatible.
Wheel: Polycarbonate hollow core.
PU: 110mm, 86a Poly Urethane.
Bearing: ABEC 7 chrome steel.
Key Features:
Total Scooter Height: 800mm
Suggested Ages: 6-12 Years
Bars Spins 360 Degrees for Tricks
Total Scooter Weight: 3.6kgs
Scooter Type: Fixed 1 piece Stunt Scooter that's not foldable, with fixed handlebar size (can but cut down after purchase)
Scooter come pre-dialled, 95% built, all that's needed to do is put the bars on, tighten then clamp then you're off
Specification:
Deck: 6061-T6, 110mm x 495mm (4.3 x 19.5”) with front and rear angled deck inserts.
Headset: Slim stack IHC head set.
Brake: Invert V3 Steel pressed underside bolt.
Bars: Hi Ten steel “T” bar (H)580 x (W)520mm.
Grips: Invert 165mm TPR 25A With TPE bar ends.
Clamp: 2 bolt 6061-T6 Aluminium.
Fork: Invert V3 reinforced steel with cut outs 120mm wheel compatible.
Wheel: Polycarbonate hollow core.
PU: 110mm, 86a Poly Urethane.
Bearing: ABEC 7 chrome steel.
