Carver Skateboard Complete Greenroom With Cx Trucks Silver
Completely assembled and ready to ride.
This mid-sized board is the perfect retro rider; wide diamond tail for solid foot placement and stretched out wheelbase for wider stance and increased stability. The Artist Series graphic is by renowned surf artist Matt Beard.
- 34" long
- 9 7/8" wide
- 6 5/8" tail
- 4 1/4" nose
- 18 7/8" wheelbase
What’s the difference between the C7 and the CX?
The C7 is Carver's signature surfskate front truck, stuff and it has an incredible amount of pump and turning radius. It has a spring loaded swing arm that allows the nose of the board to sway slightly from side to side, essentially allowing you to snap your turns from the tail and pump effortlessly for speed.
The CX is Carver's reverse-kingpin surfskate front truck, and it also has more pump and tighter turning than any other reverse kingpin truck on the market, but without any other parts. It has a similar feel to the C7 but is less extreme, so if you want a more familiar feel to your board but want to pump and surf, then the CX is the truck you want.
NOTE: the photo we used of this board shows the C7 truck though you will receive board with truck listed in the title



(CARVERGREENROOMCX)
SHIPPING COSTS
AUSTRALIA
FREE SHIPPING on all orders over $99.
$10 FLAT RATE on all orders under $99.
Express Delivery from $10.
NEW ZEALAND EXPRESS COURIER
$10 FLAT RATE or FREE SHIPPING on all orders over $199.
WORLDWIDE EXPRESS COURIER
$50 flat rate on all orders.
All orders are dispatched promptly after you place your order.
ESTIMATED DELIVERY TIMES
Delivery times below may be affected by delays due to Covid situation.
NSW - 1 to 4 working days ACT - 1 to 4 working days QLD - 1 to 4 working days VIC - 2 to 5 working days SA - 2 to 6 working days WA - 5 to 8 working days NT - 5 to 9 working days TAS - 5 to 9 working days NZ - 2 to 4 working days ASIA - 2 to 6 working days USA - 3 to 7 working days UK - 4 to 8 working days EURO - 4 to 8 working days
PAYMENT INFO
All payments are secure and protected by our sitewide HTTPS. We accept following payment methods for Australian and NZ orders; PayPal Visa MasterCard Afterpay - Buy Now Pay Later ZipPay - Buy Now Pay Later International orders we only accept PayPal as payment method.
Others Also Bought

Completely assembled and ready to ride.
Made with a shorter Hyperspoon mold for a deep-dish nose concave and full tail kick on a shorter wheelbase, this little-big-board features big, juicy 70mm Ecothane wheels for crazy grip and deep-railed carves.
Specs:
Length: 28"
Width: 9 5/8"
Wheelbase: 15 3/8"
Nose: 3 1/2"
Tail: 5 5/8"
70mm x 81a Ecothane Mag Aqua wheels
What’s the difference between the C7 and the CX?
The C7 is Carver's signature surfskate front truck, stuff and it has an incredible amount of pump and turning radius. It has a spring loaded swing arm that allows the nose of the board to sway slightly from side to side, essentially allowing you to snap your turns from the tail and pump effortlessly for speed.
The CX is Carver's reverse-kingpin surfskate front truck, and it also has more pump and tighter turning than any other reverse kingpin truck on the market, but without any other parts. It has a similar feel to the C7 but is less extreme, so if you want a more familiar feel to your board but want to pump and surf, then the CX is the truck you want.

Completely assembled and ready to ride.
This mid-sized board is the perfect retro rider; wide diamond tail for solid foot placement and stretched out wheelbase for wider stance and increased stability. The Artist Series graphic is by renowned surf artist Matt Beard.
- 34" long
- 9 7/8" wide
- 6 5/8" tail
- 4 1/4" nose
- 18 7/8" wheelbase
What’s the difference between the C7 and the CX?
The C7 is Carver's signature surfskate front truck, stuff and it has an incredible amount of pump and turning radius. It has a spring loaded swing arm that allows the nose of the board to sway slightly from side to side, essentially allowing you to snap your turns from the tail and pump effortlessly for speed.
The CX is Carver's reverse-kingpin surfskate front truck, and it also has more pump and tighter turning than any other reverse kingpin truck on the market, but without any other parts. It has a similar feel to the C7 but is less extreme, so if you want a more familiar feel to your board but want to pump and surf, then the CX is the truck you want.
NOTE: the photo we used of this board shows the C7 truck though you will receive board with truck listed in the title

Completely assembled and ready to ride.
This mid-sized board is the perfect retro rider; wide diamond tail for solid foot placement and stretched out wheelbase for wider stance and increased stability. The Artist Series graphic is by renowned surf artist Matt Beard.
- 34" long
- 9 7/8" wide
- 6 5/8" tail
- 4 1/4" nose
- 18 7/8" wheelbase
What’s the difference between the C7 and the CX?
The C7 is Carver's signature surfskate front truck, stuff and it has an incredible amount of pump and turning radius. It has a spring loaded swing arm that allows the nose of the board to sway slightly from side to side, essentially allowing you to snap your turns from the tail and pump effortlessly for speed.
The CX is Carver's reverse-kingpin surfskate front truck, and it also has more pump and tighter turning than any other reverse kingpin truck on the market, but without any other parts. It has a similar feel to the C7 but is less extreme, so if you want a more familiar feel to your board but want to pump and surf, then the CX is the truck you want.
NOTE: the photo we used of this board shows the C7 truck though you will receive board with truck listed in the title

Completely assembled and ready to ride.
A real charger, Courtney Conlogue is known as the Sea Tiger for her fierce and competitive approach to surfing. Her newest model is short and wide, perfect for a snappy surf trainer.
Specs:
29 1/2" long
9 3/4″ wide
6 1/8″ tail
3 1/4″ nose
16″ wheelbase
What’s the difference between the C7 and the CX?
The C7 is Carver's signature surfskate front truck, stuff and it has an incredible amount of pump and turning radius. It has a spring loaded swing arm that allows the nose of the board to sway slightly from side to side, essentially allowing you to snap your turns from the tail and pump effortlessly for speed.
The CX is Carver's reverse-kingpin surfskate front truck, and it also has more pump and tighter turning than any other reverse kingpin truck on the market, but without any other parts. It has a similar feel to the C7 but is less extreme, so if you want a more familiar feel to your board but want to pump and surf, then the CX is the truck you want.