Carver



Carver Skateboard Complete Blue Haze With C7 Trucks Silver

Dimensions:
Length: 43" 3.7ft | Width: 14.5in

Deck:
High-Quality 8 ply Maple/Birch/Maple plywood OR natural 3 ply Bamboo plywood.  UV resistant painted decorations or heat transfers are covered with a "clear" grit on top.  Clear varnish protects the bottom side.  There's wheel wells and grab rails on the bottom side.  PRO TIP: If you're grabbing rail on a backside turn, you've definitely figured it out and you're well on your way to mastering this b-you-tee.  

Trucks:
Patented Hamboards HST Carving Trucks w/ Silver (20lbf max) Springs and Black Kingpins, 25mm Birch (or Bamboo) Plywood riser blocks keep you up to avoid rail drag and the extra sized M6 50mm Hardware holds the trucks securely. 

Note: Gold (25lbf max) springs available as accessories and can be swapped out for the stock silver springs.  We think golds are a bit too snappy on this board but they cab be helpful for beginners and/or heavier riders.  To maximize "pumpability" swap the rear Silver Spring to a Gold Spring and you'll feel a difference that makes a difference for pump.  

Wheels & Bearings:
Custom Hamboards Milk Chocolate Cast PU 66mm 78/80A (46mm wide, 35mm contact).  It's not about the shape of the wheels, it's about the trucks, so we give you max contact area.  Hamboards SAN-O Turning Bearings are Chrome plated, greased and sealed.  The bearing experts tell us that grease is better for hard carves and heavy loads at low speeds. 

Carver Skateboard Complete Firefly With C7 Trucks Silver

The Pocket Knife is a 29.6” long Surfskate shape that’s 9.1” wide and features aggressive taper towards both the nose and tail and classic surfboard styling. 7-ply maple construction keeps the ride nice and responsive while mellow concave and a kicktail will keep your feet locked in for whatever obstacle you want to hit next. The Pocket Knife comes set up with our new Banger Surf Skate trucks combo featuring a Banger RKP front truck for maximum turn and response paired with a Polar Bear 155 rear for a stable, predictable ride. The setup is finished off with a set 63mm 78a Fatty Hawgs with a glossy surface for the smooth, grippy ride you need.
L: 29.6" | W: 9.1" | WB: 13.2 - 15.3"

Carver Skateboard Complete Glass Off With C7 Trucks Silver

Dimensions:
Length: 43" 3.7ft | Width: 14.5in

Deck:
High-Quality 8 ply Maple/Birch/Maple plywood OR natural 3 ply Bamboo plywood.  UV resistant painted decorations or heat transfers are covered with a "clear" grit on top.  Clear varnish protects the bottom side.  There's wheel wells and grab rails on the bottom side.  PRO TIP: If you're grabbing rail on a backside turn, you've definitely figured it out and you're well on your way to mastering this b-you-tee.  

Trucks:
Patented Hamboards HST Carving Trucks w/ Silver (20lbf max) Springs and Black Kingpins, 25mm Birch (or Bamboo) Plywood riser blocks keep you up to avoid rail drag and the extra sized M6 50mm Hardware holds the trucks securely. 

Note: Gold (25lbf max) springs available as accessories and can be swapped out for the stock silver springs.  We think golds are a bit too snappy on this board but they cab be helpful for beginners and/or heavier riders.  To maximize "pumpability" swap the rear Silver Spring to a Gold Spring and you'll feel a difference that makes a difference for pump.  

Wheels & Bearings:
Custom Hamboards Milk Chocolate Cast PU 66mm 78/80A (46mm wide, 35mm contact).  It's not about the shape of the wheels, it's about the trucks, so we give you max contact area.  Hamboards SAN-O Turning Bearings are Chrome plated, greased and sealed.  The bearing experts tell us that grease is better for hard carves and heavy loads at low speeds. 

Carver Skateboard Complete Glass Off With Cx Trucks Silver

Dimensions:
Length: 43" 3.7ft | Width: 14.5in

Deck:
High-Quality 8 ply Maple/Birch/Maple plywood OR natural 3 ply Bamboo plywood.  UV resistant painted decorations or heat transfers are covered with a "clear" grit on top.  Clear varnish protects the bottom side.  There's wheel wells and grab rails on the bottom side.  PRO TIP: If you're grabbing rail on a backside turn, you've definitely figured it out and you're well on your way to mastering this b-you-tee.  

Trucks:
Patented Hamboards HST Carving Trucks w/ Silver (20lbf max) Springs and Black Kingpins, 25mm Birch (or Bamboo) Plywood riser blocks keep you up to avoid rail drag and the extra sized M6 50mm Hardware holds the trucks securely. 

Note: Gold (25lbf max) springs available as accessories and can be swapped out for the stock silver springs.  We think golds are a bit too snappy on this board but they cab be helpful for beginners and/or heavier riders.  To maximize "pumpability" swap the rear Silver Spring to a Gold Spring and you'll feel a difference that makes a difference for pump.  

Wheels & Bearings:
Custom Hamboards Milk Chocolate Cast PU 66mm 78/80A (46mm wide, 35mm contact).  It's not about the shape of the wheels, it's about the trucks, so we give you max contact area.  Hamboards SAN-O Turning Bearings are Chrome plated, greased and sealed.  The bearing experts tell us that grease is better for hard carves and heavy loads at low speeds. 

Carver Skateboard Complete Knox Quill With C7 Trucks Silver

The Surf-a-Gogo collection takes a defiant spin on the surf competition held under the P.O.P (Pacific Ocean Pier) of Venice Beach, in the 1960’s. The surf competition was organised to help with the dwindling visitor numbers to the area and had surfers from all over California invited and resulted in the Venice surfers pushing back on the non-locals. We have created a collection of boards focusing on 1960s surf culture and fashion as a result of this legend that flows from mainstream surf fashion.

The 37" Log-roll Surfskate based off the popular Z-Flex Chipper shape and utilizes the patented Waterborne technology as a market first. This board is an exciting Surfskate longboard that allows tight turns and incredible speed generation from pumping the board. The board allows the rider to ride the nose, walk the deck and carve drawn-out turns with a 27.5" wheel base.

  • Length: 37"
  • Wheel Base: 27.5"
  • 8 Layers 
  • 6.25" Powder-coated Z-Flex Trucks with 90A Soft Cushions
  • Patented Waterborne Surfskate adapter with 3x more turning then an ordinary skate truck. 
  • 63mm 83A  Z-SMOOTH wheels 
  • 14 MM Z-Flex Riser Blocks
Carver Skateboard Complete Super Slab C7 Trucks Silver

Dimensions:
Length: 43" 3.7ft | Width: 14.5in

Deck:
High-Quality 8 ply Maple/Birch/Maple plywood OR natural 3 ply Bamboo plywood.  UV resistant painted decorations or heat transfers are covered with a "clear" grit on top.  Clear varnish protects the bottom side.  There's wheel wells and grab rails on the bottom side.  PRO TIP: If you're grabbing rail on a backside turn, you've definitely figured it out and you're well on your way to mastering this b-you-tee.  

Trucks:
Patented Hamboards HST Carving Trucks w/ Silver (20lbf max) Springs and Black Kingpins, 25mm Birch (or Bamboo) Plywood riser blocks keep you up to avoid rail drag and the extra sized M6 50mm Hardware holds the trucks securely. 

Note: Gold (25lbf max) springs available as accessories and can be swapped out for the stock silver springs.  We think golds are a bit too snappy on this board but they cab be helpful for beginners and/or heavier riders.  To maximize "pumpability" swap the rear Silver Spring to a Gold Spring and you'll feel a difference that makes a difference for pump.  

Wheels & Bearings:
Custom Hamboards Milk Chocolate Cast PU 66mm 78/80A (46mm wide, 35mm contact).  It's not about the shape of the wheels, it's about the trucks, so we give you max contact area.  Hamboards SAN-O Turning Bearings are Chrome plated, greased and sealed.  The bearing experts tell us that grease is better for hard carves and heavy loads at low speeds. 

Carver Skateboard Complete Super Snapper With C7 Trucks Silver

Dimensions:
Length: 43" 3.7ft | Width: 14.5in

Deck:
High-Quality 8 ply Maple/Birch/Maple plywood OR natural 3 ply Bamboo plywood.  UV resistant painted decorations or heat transfers are covered with a "clear" grit on top.  Clear varnish protects the bottom side.  There's wheel wells and grab rails on the bottom side.  PRO TIP: If you're grabbing rail on a backside turn, you've definitely figured it out and you're well on your way to mastering this b-you-tee.  

Trucks:
Patented Hamboards HST Carving Trucks w/ Silver (20lbf max) Springs and Black Kingpins, 25mm Birch (or Bamboo) Plywood riser blocks keep you up to avoid rail drag and the extra sized M6 50mm Hardware holds the trucks securely. 

Note: Gold (25lbf max) springs available as accessories and can be swapped out for the stock silver springs.  We think golds are a bit too snappy on this board but they cab be helpful for beginners and/or heavier riders.  To maximize "pumpability" swap the rear Silver Spring to a Gold Spring and you'll feel a difference that makes a difference for pump.  

Wheels & Bearings:
Custom Hamboards Milk Chocolate Cast PU 66mm 78/80A (46mm wide, 35mm contact).  It's not about the shape of the wheels, it's about the trucks, so we give you max contact area.  Hamboards SAN-O Turning Bearings are Chrome plated, greased and sealed.  The bearing experts tell us that grease is better for hard carves and heavy loads at low speeds. 

Carver Skateboard Complete Swallow With C7 Trucks Silver

Exotic Veneer and Canadian Maple Deck
6.5” Reverse King Pin Surf truck front
6.5” Standard truck back
3mm riser pads
65mm 78a wheels
Abec 7 chrome bearings
Printed deck grip 
Length 31” x width 10”

Carver Skateboard Complete Tyler 777 With C7 Trucks Silver

Dimensions:
Length: 43" 3.7ft | Width: 14.5in

Deck:
High-Quality 8 ply Maple/Birch/Maple plywood OR natural 3 ply Bamboo plywood.  UV resistant painted decorations or heat transfers are covered with a "clear" grit on top.  Clear varnish protects the bottom side.  There's wheel wells and grab rails on the bottom side.  PRO TIP: If you're grabbing rail on a backside turn, you've definitely figured it out and you're well on your way to mastering this b-you-tee.  

Trucks:
Patented Hamboards HST Carving Trucks w/ Silver (20lbf max) Springs and Black Kingpins, 25mm Birch (or Bamboo) Plywood riser blocks keep you up to avoid rail drag and the extra sized M6 50mm Hardware holds the trucks securely. 

Note: Gold (25lbf max) springs available as accessories and can be swapped out for the stock silver springs.  We think golds are a bit too snappy on this board but they cab be helpful for beginners and/or heavier riders.  To maximize "pumpability" swap the rear Silver Spring to a Gold Spring and you'll feel a difference that makes a difference for pump.  

Wheels & Bearings:
Custom Hamboards Milk Chocolate Cast PU 66mm 78/80A (46mm wide, 35mm contact).  It's not about the shape of the wheels, it's about the trucks, so we give you max contact area.  Hamboards SAN-O Turning Bearings are Chrome plated, greased and sealed.  The bearing experts tell us that grease is better for hard carves and heavy loads at low speeds. 

Carver Skateboard Complete Yago Dora Skinny Goat With C7 Trucks Silver

Jor Ros grew up moving back and forth between Mexico and the U.S. and would spend his free time making up characters and creating fictional universes though his drawings. Today, the Barcelona-based artist has developed a portfolio of digital illustrations that imagine the contemporary urban samurai warrior, borrowing the motifs and aesthetic hallmarks of traditional Japanese folklore and American cartoons through a warm, eye grabbing palette. We’re stoked to introduce Jor as our latest featured Artist, and bring some unique Far East style to Sector 9’s West Coast craftsmanship.

RIDING STYLE
Carving +
 
DIMENSIONS
Length: 36.0”
Width: 9.0”
Wheelbase: 23.6”
 
COMPONENTS
9.0” Gullwing Sidewinder II Trucks
69mm 78a Nineballs
ABEC 5 Greaseball Bearings
1.125” Truss Head Steel Bolts
Regular Grip Tape
 
FEATURES
7 Ply Maple
Two-Color Dipped Maple Bottom Ply
Printed Grip Tape
Drop Thru
Art by Jor Ros