Sector 9 Complete Cruiser Skateboard Bambino

$159.99
RRP $199.99
SAVE $40.00 (20%)
Sold Out
same day dispatch tick Free Shipping Australia Wide Orders Over $99
trusted australian business tick Need Help? Customer Support (07) 5641-1535

Completely assembled and ready to ride.

Kick Push are an authorised Sector 9 dealer.

All prices in Australian Dollars including GST.

This little ripper is a pocket sized slasher you can take to the corner store or your favorite ditch. It is light and eco friendly because of the bamboo construction but is still capable of popping up a curb with a full and functional tail. The 61mm Nineball wheels are stone ground to get you right into the slide and rounded lips to get you on and off the grinds.

Construction
Vertically Laminated Bamboo
Solo Pro Mold
Top Mount

Dimensions

- 26.5" L x 7.5" W x 14.25" WB

Hardware

- 8.0" Gullwing Mission Trucks
- 61mm 78a Centerset Nineball Wheels
- Abec 5 PDP Bearings
- 0.5" Sector 9 Recycled Plastic Risers
- 1.5" Hardened Steel Bolts
- Clear Grip Tape

90 day returns tick 90 Day Returns Money Back Guarantee
afterpay tick Afterpay & Zip Pay Shop Now, Take Now, Pay Later
world wide shipping tick World Wide Shipping NZ, USA, Canada, UK, Europe, ASIA + More

(SECT9BAMBINO)

SHIPPING COSTS

AUSTRALIA
FREE SHIPPING on all orders over $99.
$10 FLAT RATE on all orders under $99.
Express Delivery from $10.

NEW ZEALAND EXPRESS COURIER
$10 FLAT RATE or FREE SHIPPING on all orders over $199.

WORLDWIDE EXPRESS COURIER
$50 flat rate on all orders.

All orders are dispatched promptly after you place your order.

ESTIMATED DELIVERY TIMES

Delivery times below may be affected by delays due to Covid situation.

NSW - 1 to 4 working days
ACT - 1 to 4 working days
QLD - 1 to 4 working days
VIC - 2 to 5 working days
SA - 2 to 6 working days
WA - 5 to 8 working days
NT - 5 to 9 working days
TAS - 5 to 9 working days

NZ - 2 to 4 working days
ASIA - 2 to 6 working days
USA - 3 to 7 working days
UK - 4 to 8 working days
EURO - 4 to 8 working days

PAYMENT INFO

All payments are secure and protected by our sitewide HTTPS.

We accept following payment methods for Australian and NZ orders;

PayPal
Visa
MasterCard
Afterpay - Buy Now Pay Later
ZipPay - Buy Now Pay Later

International orders we only accept PayPal as payment method.


More From This Category


 Z-Flex Complete Cruiser Skateboard Aragon Cheetah 80s Frog 31

Completely assembled and ready to ride.

We’re continuing our development of surf/skate pairings with the iconic Channel Islands Flyer, designed by Al Merrick. We’ve kept the slight rail bump at the tail, giving you a slightly wider back foot platform while keeping the overall template light and snappy, just like its namesake.

- 30.75" long
- 9 3/4" wide
- 6 1/8" tail
- 3 3/8" nose
- 16 3/4" wheelbase

What’s the difference between the C7 and the CX?

The C7 is Carver's signature surfskate front truck, stuff and it has an incredible amount of pump and turning radius. It has a spring loaded swing arm that allows the nose of the board to sway slightly from side to side, essentially allowing you to snap your turns from the tail and pump effortlessly for speed.

The CX is Carver's reverse-kingpin surfskate front truck, and it also has more pump and tighter turning than any other reverse kingpin truck on the market, but without any other parts. It has a similar feel to the C7 but is less extreme, so if you want a more familiar feel to your board but want to pump and surf, then the CX is the truck you want.

 Z-Flex Complete Cruiser Skateboard Jay Adams Metalflake Blue 29

Completely assembled and ready to ride.

We’re continuing our development of surf/skate pairings with the iconic Channel Islands Flyer, designed by Al Merrick. We’ve kept the slight rail bump at the tail, giving you a slightly wider back foot platform while keeping the overall template light and snappy, just like its namesake.

- 30.75" long
- 9 3/4" wide
- 6 1/8" tail
- 3 3/8" nose
- 16 3/4" wheelbase

What’s the difference between the C7 and the CX?

The C7 is Carver's signature surfskate front truck, stuff and it has an incredible amount of pump and turning radius. It has a spring loaded swing arm that allows the nose of the board to sway slightly from side to side, essentially allowing you to snap your turns from the tail and pump effortlessly for speed.

The CX is Carver's reverse-kingpin surfskate front truck, and it also has more pump and tighter turning than any other reverse kingpin truck on the market, but without any other parts. It has a similar feel to the C7 but is less extreme, so if you want a more familiar feel to your board but want to pump and surf, then the CX is the truck you want.

 Z-Flex Complete Cruiser Skateboard Jay Adams Metalflake Gold 29

Completely assembled and ready to ride.

We’re continuing our development of surf/skate pairings with the iconic Channel Islands Flyer, designed by Al Merrick. We’ve kept the slight rail bump at the tail, giving you a slightly wider back foot platform while keeping the overall template light and snappy, just like its namesake.

- 30.75" long
- 9 3/4" wide
- 6 1/8" tail
- 3 3/8" nose
- 16 3/4" wheelbase

What’s the difference between the C7 and the CX?

The C7 is Carver's signature surfskate front truck, stuff and it has an incredible amount of pump and turning radius. It has a spring loaded swing arm that allows the nose of the board to sway slightly from side to side, essentially allowing you to snap your turns from the tail and pump effortlessly for speed.

The CX is Carver's reverse-kingpin surfskate front truck, and it also has more pump and tighter turning than any other reverse kingpin truck on the market, but without any other parts. It has a similar feel to the C7 but is less extreme, so if you want a more familiar feel to your board but want to pump and surf, then the CX is the truck you want.

 Z-Flex Complete Cruiser Skateboard Jay Adams POP Olive 29

Completely assembled and ready to ride.

We’re continuing our development of surf/skate pairings with the iconic Channel Islands Flyer, designed by Al Merrick. We’ve kept the slight rail bump at the tail, giving you a slightly wider back foot platform while keeping the overall template light and snappy, just like its namesake.

- 30.75" long
- 9 3/4" wide
- 6 1/8" tail
- 3 3/8" nose
- 16 3/4" wheelbase

What’s the difference between the C7 and the CX?

The C7 is Carver's signature surfskate front truck, stuff and it has an incredible amount of pump and turning radius. It has a spring loaded swing arm that allows the nose of the board to sway slightly from side to side, essentially allowing you to snap your turns from the tail and pump effortlessly for speed.

The CX is Carver's reverse-kingpin surfskate front truck, and it also has more pump and tighter turning than any other reverse kingpin truck on the market, but without any other parts. It has a similar feel to the C7 but is less extreme, so if you want a more familiar feel to your board but want to pump and surf, then the CX is the truck you want.

 Z-Flex Complete Cruiser Skateboard Jay Adams Shadow Lurker 29

Completely assembled and ready to ride.

We’re continuing our development of surf/skate pairings with the iconic Channel Islands Flyer, designed by Al Merrick. We’ve kept the slight rail bump at the tail, giving you a slightly wider back foot platform while keeping the overall template light and snappy, just like its namesake.

- 30.75" long
- 9 3/4" wide
- 6 1/8" tail
- 3 3/8" nose
- 16 3/4" wheelbase

What’s the difference between the C7 and the CX?

The C7 is Carver's signature surfskate front truck, stuff and it has an incredible amount of pump and turning radius. It has a spring loaded swing arm that allows the nose of the board to sway slightly from side to side, essentially allowing you to snap your turns from the tail and pump effortlessly for speed.

The CX is Carver's reverse-kingpin surfskate front truck, and it also has more pump and tighter turning than any other reverse kingpin truck on the market, but without any other parts. It has a similar feel to the C7 but is less extreme, so if you want a more familiar feel to your board but want to pump and surf, then the CX is the truck you want.