SKATEBOARDS
ACCESSORIES
APPAREL
FOOTWEAR
PROTECTION
SCOOTERS
Brands
Root Industries Premium Hand Grips Clear Transparent
.png)
Free Shipping Australia Wide Orders Over $99The Root Industries scooter grips are the result of 18 months research and development into finding the best formula for grips. Approved by Root Industries Team Riders Regan Thompson, Reece Jones, Nathan Fleming, Royce King and Moey Ahmad the Root Industries grips are also the choice grips of the entire Scooter Hut team.
Root Industries grips have been moulded in the classic ribbed design, which has been proven time and again to be the best design for comfort. The grips are 150mm long, which is slightly longer than most bicycle grips.
Where these grips really stand out from the rest is in the choice of material used to make htem. The grips are manufactured from a secret kraton gel formula, which provides the most amazing soft feel, yet in our tests proved to be the longest lasting grip amongst them all. This combination of comfort and durability is what makes the Root Industries grips stand out from the crowd.
90 Day Returns Money Back Guarantee Afterpay & Zip Pay Shop Now, Take Now, Pay Later World Wide Shipping NZ, USA, Canada, UK, Europe, ASIA + More(ROOTGRIPSCLEARTRANSPARENT)
SHIPPING COSTS
AUSTRALIA
FREE SHIPPING on all orders over $49 (or $10 under $49).
$15 EXPRESS POST flat rate per order
NEW ZEALAND EXPRESS COURIER
$15 FLAT RATE or FREE SHIPPING on all orders over $99.
WORLDWIDE EXPRESS COURIER
$30 to USA/Canada/Asia and $60 to rest of the world.
All orders are dispatched promptly after you place your order.
ESTIMATED DELIVERY TIMES
Delivery times below may be affected by delays due to Covid situation.
NSW - 1 to 4 working days ACT - 1 to 4 working days QLD - 1 to 4 working days VIC - 2 to 5 working days SA - 2 to 6 working days WA - 5 to 8 working days NT - 5 to 9 working days TAS - 5 to 9 working days NZ - 2 to 4 working days ASIA - 2 to 6 working days USA - 3 to 7 working days UK - 4 to 8 working days EURO - 4 to 8 working days
PAYMENT INFO
All payments are secure and protected by our sitewide HTTPS. We accept following payment methods; PayPal Visa MasterCard American Express Apple Pay Google Pay Afterpay - Buy Now Pay Later ZipPay - Buy Now Pay LaterMore From This Category
High quality and reliable grip tape from Envy Scooters, new for 2018.
Cut this grip to the size you need.
Features:
- 6.1 inches wide (155mm)
- 23.3 inches long (585mm)
- Will fit other scooters (we recommend you measure your deck)
High quality and reliable grip tape from Envy Scooters, new for 2018.
Cut this grip to the size you need.
Features:
- 6.1 inches wide (155mm)
- 23.3 inches long (585mm)
- Will fit other scooters (we recommend you measure your deck)
High quality and reliable grip tape from Envy Scooters, new for 2018.
Cut this grip to the size you need.
Features:
- 6.1 inches wide (155mm)
- 23.3 inches long (585mm)
- Will fit other scooters (we recommend you measure your deck)
High quality and reliable grip tape from Envy Scooters, new for 2018.
Cut this grip to the size you need.
Features:
- 6.1 inches wide (155mm)
- 23.3 inches long (585mm)
- Will fit other scooters (we recommend you measure your deck)
High quality and reliable grip tape from Envy Scooters, new for 2018.
Cut this grip to the size you need.
Features:
- 6.1 inches wide (155mm)
- 23.3 inches long (585mm)
- Will fit other scooters (we recommend you measure your deck)
We Also Recommend
The all new, ultimate scooter storage solution from Scoot-Rack!
Keep your scooters safe, off the floor and out of the way with this amazing wall mount system from Scoot-Rack!
Easy to use and install into any wall in the house or garage and compatible with slat wall for commercial use!
You'll never need another storage solution for your scooters!
The all new, ultimate scooter storage solution from Scoot-Rack!
Keep your scooters safe, off the floor and out of the way with this amazing wall mount system from Scoot-Rack!
Easy to use and install into any wall in the house or garage and compatible with slat wall for commercial use!
You'll never need another storage solution for your scooters!
Key Features:
Total Scooter Height: 800mm
Suggested Ages: 6-12 Years
Bars Spins 360 Degrees for Tricks
Total Scooter Weight: 3.6kgs
Scooter Type: Fixed 1 piece Stunt Scooter that's not foldable, with fixed handlebar size (can but cut down after purchase)
Scooter come pre-dialled, 95% built, all that's needed to do is put the bars on, tighten then clamp then you're off
Specification:
Deck: 6061-T6, 110mm x 495mm (4.3 x 19.5”) with front and rear angled deck inserts.
Headset: Slim stack IHC head set.
Brake: Invert V3 Steel pressed underside bolt.
Bars: Hi Ten steel “T” bar (H)580 x (W)520mm.
Grips: Invert 165mm TPR 25A With TPE bar ends.
Clamp: 2 bolt 6061-T6 Aluminium.
Fork: Invert V3 reinforced steel with cut outs 120mm wheel compatible.
Wheel: Polycarbonate hollow core.
PU: 110mm, 86a Poly Urethane.
Bearing: ABEC 7 chrome steel.
Key Features:
Total Scooter Height: 800mm
Suggested Ages: 6-12 Years
Bars Spins 360 Degrees for Tricks
Total Scooter Weight: 3.6kgs
Scooter Type: Fixed 1 piece Stunt Scooter that's not foldable, with fixed handlebar size (can but cut down after purchase)
Scooter come pre-dialled, 95% built, all that's needed to do is put the bars on, tighten then clamp then you're off
Specification:
Deck: 6061-T6, 110mm x 495mm (4.3 x 19.5”) with front and rear angled deck inserts.
Headset: Slim stack IHC head set.
Brake: Invert V3 Steel pressed underside bolt.
Bars: Hi Ten steel “T” bar (H)580 x (W)520mm.
Grips: Invert 165mm TPR 25A With TPE bar ends.
Clamp: 2 bolt 6061-T6 Aluminium.
Fork: Invert V3 reinforced steel with cut outs 120mm wheel compatible.
Wheel: Polycarbonate hollow core.
PU: 110mm, 86a Poly Urethane.
Bearing: ABEC 7 chrome steel.
Key Features:
Total Scooter Height: 800mm
Suggested Ages: 6-12 Years
Bars Spins 360 Degrees for Tricks
Total Scooter Weight: 3.6kgs
Scooter Type: Fixed 1 piece Stunt Scooter that's not foldable, with fixed handlebar size (can but cut down after purchase)
Scooter come pre-dialled, 95% built, all that's needed to do is put the bars on, tighten then clamp then you're off
Specification:
Deck: 6061-T6, 110mm x 495mm (4.3 x 19.5”) with front and rear angled deck inserts.
Headset: Slim stack IHC head set.
Brake: Invert V3 Steel pressed underside bolt.
Bars: Hi Ten steel “T” bar (H)580 x (W)520mm.
Grips: Invert 165mm TPR 25A With TPE bar ends.
Clamp: 2 bolt 6061-T6 Aluminium.
Fork: Invert V3 reinforced steel with cut outs 120mm wheel compatible.
Wheel: Polycarbonate hollow core.
PU: 110mm, 86a Poly Urethane.
Bearing: ABEC 7 chrome steel.
