Apex Headset Bearings For Scooter Bmx Set Of 2 1 1/8 Inch

When P-Rod left Plan B everybody was excited to hear what his next move was going to be. Which deck company would he skate for? Would he even go so far as to start his own label? Indeed he did, Paul Rodriguez then founded Primitive Skateboards. That was a smart move! P-Rod has proven his talent at making skateboards time and time again. In addition to decks and skateboard bearings the brand has an excellent streetwear assortment.

Quality Scooter Deck from Native

Specifications of the Native Advent Deck:

Measurements are taken from a 23 inch long version - Please subtract 1 or 2 inches for 22 and 21 in any length measurements regarding length.
Length: 585mm / 23 inches
Footspace: 437mm / 17.2 inches
Wheelbase: 660mm / 25.9 inches
Crookspace: 50mm / 1.9 inches
Width: 140mm / 5.5 inches
Weight of deck: 1800 grams
Weight of fender: 110 grams
Weight of axle and deck ends: 80 grams
Total weight all included: 1990 grams
(this weight is for the longest widest version)
Headtube Angle: 83 degrees

NATIVE has been hard at work on the Advent II and the time has finally come.

Every millimetre of this deck has been reviewed and recalibrated from the thickness of the front of the downtube to the thickness of the vertical walls that the axle goes through.

The downtube-to-deck configuration was chosen after over 10 different combinations were tested by a wide spectrum of riders within and outside of NATIVE's direct team/family.

Zero cracks on the chosen configuration was the desired and achieved result through intense riding and stress testing.

The crook groove on the Advent II is now curved and creates a perfect lock-in point to help you learn and hold crook grinds.

NATIVE have kept the flat sides and flat bottom but increased the radius of the curve on the bottom corner of the Advent II to give you even smoother boardslides.

The concave has been sufficiently increased creating an incredible foot hugging experience for the rider.

NATIVE's Advent II comes with Loc-Fast Deck Ends featuring an integrated thread keeping the Deck Ends tubular for superior 5.0’s and the ability to rotate as needed.

Loc-Fast Deck Ends only need a 6mm allen key to tighten and loosen.

The Advent II is the only scooter deck created that accommodates all industry standard wheels and comes with all 3 sets of spacers to do so.

The NATIVE Omni Fender comes on all Advent II Decks.

The Omni Fender fits anything from standard wheels to 30mm wide/125mm diameter wheels.

The unique fastening channel system below allows you slide the Omni Fender as close as possible to whatever wheel you choose to run so you have maximum foot room.

Want even more foot room? Simply don’t like fenders? That’s cool, half of the NATIVE team don’t run fenders either! You can remove the Omni Fender from the Advent

Deck without it affecting the Advent Decks back end spacer system.

Skatie Skootie 2-in-1 is made for younger children as it has an elongated wheelbase for better control and stability when taking the first steps in learning how to skate. Plus it comes with different coloured deck plates and tail angles so the colours can be changed to suit the child’s preferences.

Skateboard and scooter in one
Lean to steer, learn to skate
Switch between skateboard and scooter without tools
Elongated wheel base for better control and stability when learning how to skate
Adjustable (and removable) handlebar with quick release to different heights
3 different coloured deck plates to customize your board
3 different coloured tail angles
Polyurethane (PU) wheels
ABEC-7 bearings for effortless gliding
Light weight and easy to carry
Dimensions: 62 x 16.5 x 57.5 – 81 cm

Handle-bar height : 66 - 81 cm

Ages: 3+ years

Max. Rider Weight: 50kg

Skatie Skootie 2-in-1 is made for younger children as it has an elongated wheelbase for better control and stability when taking the first steps in learning how to skate. Plus it comes with different coloured deck plates and tail angles so the colours can be changed to suit the child’s preferences.

Skateboard and scooter in one
Lean to steer, learn to skate
Switch between skateboard and scooter without tools
Elongated wheel base for better control and stability when learning how to skate
Adjustable (and removable) handlebar with quick release to different heights
3 different coloured deck plates to customize your board
3 different coloured tail angles
Polyurethane (PU) wheels
ABEC-7 bearings for effortless gliding
Light weight and easy to carry
Dimensions: 62 x 16.5 x 57.5 – 81 cm

Handle-bar height : 66 - 81 cm

Ages: 3+ years

Max. Rider Weight: 50kg

Skatie Skootie 2-in-1 is made for younger children as it has an elongated wheelbase for better control and stability when taking the first steps in learning how to skate. Plus it comes with different coloured deck plates and tail angles so the colours can be changed to suit the child’s preferences.

Skateboard and scooter in one
Lean to steer, learn to skate
Switch between skateboard and scooter without tools
Elongated wheel base for better control and stability when learning how to skate
Adjustable (and removable) handlebar with quick release to different heights
3 different coloured deck plates to customize your board
3 different coloured tail angles
Polyurethane (PU) wheels
ABEC-7 bearings for effortless gliding
Light weight and easy to carry
Dimensions: 62 x 16.5 x 57.5 – 81 cm

Handle-bar height : 66 - 81 cm

Ages: 3+ years

Max. Rider Weight: 50kg

Skatie Skootie 2-in-1 is made for younger children as it has an elongated wheelbase for better control and stability when taking the first steps in learning how to skate. Plus it comes with different coloured deck plates and tail angles so the colours can be changed to suit the child’s preferences.

Skateboard and scooter in one
Lean to steer, learn to skate
Switch between skateboard and scooter without tools
Elongated wheel base for better control and stability when learning how to skate
Adjustable (and removable) handlebar with quick release to different heights
3 different coloured deck plates to customize your board
3 different coloured tail angles
Polyurethane (PU) wheels
ABEC-7 bearings for effortless gliding
Light weight and easy to carry
Dimensions: 62 x 16.5 x 57.5 – 81 cm

Handle-bar height : 66 - 81 cm

Ages: 3+ years

Max. Rider Weight: 50kg

Skatie Skootie 2-in-1 is made for younger children as it has an elongated wheelbase for better control and stability when taking the first steps in learning how to skate. Plus it comes with different coloured deck plates and tail angles so the colours can be changed to suit the child’s preferences.

Skateboard and scooter in one
Lean to steer, learn to skate
Switch between skateboard and scooter without tools
Elongated wheel base for better control and stability when learning how to skate
Adjustable (and removable) handlebar with quick release to different heights
3 different coloured deck plates to customize your board
3 different coloured tail angles
Polyurethane (PU) wheels
ABEC-7 bearings for effortless gliding
Light weight and easy to carry
Dimensions: 62 x 16.5 x 57.5 – 81 cm

Handle-bar height : 66 - 81 cm

Ages: 3+ years

Max. Rider Weight: 50kg

Specifications of the Native Advent Deck:

Measurements are taken from a 23 inch long version - Please subtract 1 or 2 inches for 22 and 21 in any length measurements regarding length.
Length: 585mm / 23 inches
Footspace: 437mm / 17.2 inches
Wheelbase: 660mm / 25.9 inches
Crookspace: 50mm / 1.9 inches
Width: 140mm / 5.5 inches
Weight of deck: 1800 grams
Weight of fender: 110 grams
Weight of axle and deck ends: 80 grams
Total weight all included: 1990 grams
(this weight is for the longest widest version)
Headtube Angle: 83 degrees

NATIVE has been hard at work on the Advent II and the time has finally come.

Every millimetre of this deck has been reviewed and recalibrated from the thickness of the front of the downtube to the thickness of the vertical walls that the axle goes through.

The downtube-to-deck configuration was chosen after over 10 different combinations were tested by a wide spectrum of riders within and outside of NATIVE's direct team/family.

Zero cracks on the chosen configuration was the desired and achieved result through intense riding and stress testing.

The crook groove on the Advent II is now curved and creates a perfect lock-in point to help you learn and hold crook grinds.

NATIVE have kept the flat sides and flat bottom but increased the radius of the curve on the bottom corner of the Advent II to give you even smoother boardslides.

The concave has been sufficiently increased creating an incredible foot hugging experience for the rider.

NATIVE's Advent II comes with Loc-Fast Deck Ends featuring an integrated thread keeping the Deck Ends tubular for superior 5.0’s and the ability to rotate as needed.

Loc-Fast Deck Ends only need a 6mm allen key to tighten and loosen.

The Advent II is the only scooter deck created that accommodates all industry standard wheels and comes with all 3 sets of spacers to do so.

The NATIVE Omni Fender comes on all Advent II Decks.

The Omni Fender fits anything from standard wheels to 30mm wide/125mm diameter wheels.

The unique fastening channel system below allows you slide the Omni Fender as close as possible to whatever wheel you choose to run so you have maximum foot room.

Want even more foot room? Simply don’t like fenders? That’s cool, half of the NATIVE team don’t run fenders either! You can remove the Omni Fender from the Advent

Deck without it affecting the Advent Decks back end spacer system.

Specifications of the Native Advent Deck:

Measurements are taken from a 23 inch long version - Please subtract 1 or 2 inches for 22 and 21 in any length measurements regarding length.
Length: 585mm / 23 inches
Footspace: 437mm / 17.2 inches
Wheelbase: 660mm / 25.9 inches
Crookspace: 50mm / 1.9 inches
Width: 140mm / 5.5 inches
Weight of deck: 1800 grams
Weight of fender: 110 grams
Weight of axle and deck ends: 80 grams
Total weight all included: 1990 grams
(this weight is for the longest widest version)
Headtube Angle: 83 degrees

NATIVE has been hard at work on the Advent II and the time has finally come.

Every millimetre of this deck has been reviewed and recalibrated from the thickness of the front of the downtube to the thickness of the vertical walls that the axle goes through.

The downtube-to-deck configuration was chosen after over 10 different combinations were tested by a wide spectrum of riders within and outside of NATIVE's direct team/family.

Zero cracks on the chosen configuration was the desired and achieved result through intense riding and stress testing.

The crook groove on the Advent II is now curved and creates a perfect lock-in point to help you learn and hold crook grinds.

NATIVE have kept the flat sides and flat bottom but increased the radius of the curve on the bottom corner of the Advent II to give you even smoother boardslides.

The concave has been sufficiently increased creating an incredible foot hugging experience for the rider.

NATIVE's Advent II comes with Loc-Fast Deck Ends featuring an integrated thread keeping the Deck Ends tubular for superior 5.0’s and the ability to rotate as needed.

Loc-Fast Deck Ends only need a 6mm allen key to tighten and loosen.

The Advent II is the only scooter deck created that accommodates all industry standard wheels and comes with all 3 sets of spacers to do so.

The NATIVE Omni Fender comes on all Advent II Decks.

The Omni Fender fits anything from standard wheels to 30mm wide/125mm diameter wheels.

The unique fastening channel system below allows you slide the Omni Fender as close as possible to whatever wheel you choose to run so you have maximum foot room.

Want even more foot room? Simply don’t like fenders? That’s cool, half of the NATIVE team don’t run fenders either! You can remove the Omni Fender from the Advent

Deck without it affecting the Advent Decks back end spacer system.

When P-Rod left Plan B everybody was excited to hear what his next move was going to be. Which deck company would he skate for? Would he even go so far as to start his own label? Indeed he did, Paul Rodriguez then founded Primitive Skateboards. That was a smart move! P-Rod has proven his talent at making skateboards time and time again. In addition to decks and skateboard bearings the brand has an excellent streetwear assortment.

When P-Rod left Plan B everybody was excited to hear what his next move was going to be. Which deck company would he skate for? Would he even go so far as to start his own label? Indeed he did, Paul Rodriguez then founded Primitive Skateboards. That was a smart move! P-Rod has proven his talent at making skateboards time and time again. In addition to decks and skateboard bearings the brand has an excellent streetwear assortment.

When P-Rod left Plan B everybody was excited to hear what his next move was going to be. Which deck company would he skate for? Would he even go so far as to start his own label? Indeed he did, Paul Rodriguez then founded Primitive Skateboards. That was a smart move! P-Rod has proven his talent at making skateboards time and time again. In addition to decks and skateboard bearings the brand has an excellent streetwear assortment.