Fasen 120mm Scooter Wheels Set Of 2 Burnt Pipe
Set of 2 wheels with pre-installed Fasen Abec 9 bearings
Straight from Fasen awesome 2015 range of products, here we have the new 120mm spoked Aluminium core wheels.
A great wheel upgrade if you are considering switching to a 125mm/120mm setup. Tested extensively by the Worldwide Team.
Features:
- Toughened Anodized finish
- 120mm Diameter
- Lightweight design
- 86a Urethane
- Includes Abec 9 Bearings
- Only compatible with 120mm setups



(FASENWHL120BURNTPIPE)
SHIPPING COSTS
AUSTRALIA
FREE SHIPPING on all orders over $99.
$10 FLAT RATE on all orders under $99.
Express Delivery from $10.
NEW ZEALAND EXPRESS COURIER
$10 FLAT RATE or FREE SHIPPING on all orders over $199.
WORLDWIDE EXPRESS COURIER
$50 flat rate on all orders.
All orders are dispatched promptly after you place your order.
ESTIMATED DELIVERY TIMES
Delivery times below may be affected by delays due to Covid situation.
NSW - 1 to 4 working days ACT - 1 to 4 working days QLD - 1 to 4 working days VIC - 2 to 5 working days SA - 2 to 6 working days WA - 5 to 8 working days NT - 5 to 9 working days TAS - 5 to 9 working days NZ - 2 to 4 working days ASIA - 2 to 6 working days USA - 3 to 7 working days UK - 4 to 8 working days EURO - 4 to 8 working days
PAYMENT INFO
All payments are secure and protected by our sitewide HTTPS. We accept following payment methods for Australian and NZ orders; PayPal Visa MasterCard Afterpay - Buy Now Pay Later ZipPay - Buy Now Pay Later International orders we only accept PayPal as payment method.
More From This Category

The Lucid Deck feels thin and ultra-light under your feet. Deep-dish concave give it a responsive feel. The bottom of the deck has the same radius on each side, combined with solid aluminum dropouts to create the first bi-rectional grinding surface. This gives grinds the same smooth feel whether you're grinding on the front, back, or sides. The Lucid Deck creates a riding experience that you'll have to pinch yourself to believe.
Check out the Lucid Fender!
Specs:
(5.5"x22") (5.5x23") (6"x23")
Solid Aluminum Dropout Inserts
3.00 lb, 3.10 lb, and 3.25 lb before accessories
84° HTA

The Lucid Deck feels thin and ultra-light under your feet. Deep-dish concave give it a responsive feel. The bottom of the deck has the same radius on each side, combined with solid aluminum dropouts to create the first bi-rectional grinding surface. This gives grinds the same smooth feel whether you're grinding on the front, back, or sides. The Lucid Deck creates a riding experience that you'll have to pinch yourself to believe.
Check out the Lucid Fender!
Specs:
(5.5"x22") (5.5x23") (6"x23")
Solid Aluminum Dropout Inserts
3.00 lb, 3.10 lb, and 3.25 lb before accessories
84° HTA

The Lucid Deck feels thin and ultra-light under your feet. Deep-dish concave give it a responsive feel. The bottom of the deck has the same radius on each side, combined with solid aluminum dropouts to create the first bi-rectional grinding surface. This gives grinds the same smooth feel whether you're grinding on the front, back, or sides. The Lucid Deck creates a riding experience that you'll have to pinch yourself to believe.
Check out the Lucid Fender!
Specs:
(5.5"x22") (5.5x23") (6"x23")
Solid Aluminum Dropout Inserts
3.00 lb, 3.10 lb, and 3.25 lb before accessories
84° HTA

Affinity Classic XL Scooter Bars 710mm Oversized Midnight Teal
- Slick Ti bars, super lightweight and strong for elite level riding.
- 610mm x 610mm (24" x 24") constructed from the very highest grade Titanium.
- Slitted for HIC compression (can be run SCS with insert - sold separately)
- Weighing in at just 734g (1.6 lbs) these handlebars will shred some serious pounds off any setup.
- External Diameter - 34.9mm
We Also Recommend

- Slick Ti bars, super lightweight and strong for elite level riding.
- 610mm x 610mm (24" x 24") constructed from the very highest grade Titanium.
- Slitted for HIC compression (can be run SCS with insert - sold separately)
- Weighing in at just 734g (1.6 lbs) these handlebars will shred some serious pounds off any setup.
- External Diameter - 34.9mm

- Slick Ti bars, super lightweight and strong for elite level riding.
- 610mm x 610mm (24" x 24") constructed from the very highest grade Titanium.
- Slitted for HIC compression (can be run SCS with insert - sold separately)
- Weighing in at just 734g (1.6 lbs) these handlebars will shred some serious pounds off any setup.
- External Diameter - 34.9mm

The SCS ARC compression clamp from Tilt Scooters features a profile machined face, and is structurally balanced putting the material and strength where needed. The Tilt Arc SCS uses the same custom bolts as the Classic SCS with a 6mm hex key drive and 50% larger threads provide more clamping power and help keep the compression tight and bars in place. Every clamp bolt from Tilt comes with pre-applied anti-seize to prevent them from seizing to the clamp. For added compatibility, the removable shim allows use with both size handlebars.
- Material: 6061-T6 Aluminum
- Colors: Black, Gray, Red, Gold, Blue, Purple
- Height: 3.0″
- Compatibility: Regular (1-1/4″) & oversized (1-3/8″) handlebars
- Weight: 7.9 oz

The SCS ARC compression clamp from Tilt Scooters features a profile machined face, and is structurally balanced putting the material and strength where needed. The Tilt Arc SCS uses the same custom bolts as the Classic SCS with a 6mm hex key drive and 50% larger threads provide more clamping power and help keep the compression tight and bars in place. Every clamp bolt from Tilt comes with pre-applied anti-seize to prevent them from seizing to the clamp. For added compatibility, the removable shim allows use with both size handlebars.
- Material: 6061-T6 Aluminum
- Colors: Black, Gray, Red, Gold, Blue, Purple
- Height: 3.0″
- Compatibility: Regular (1-1/4″) & oversized (1-3/8″) handlebars
- Weight: 7.9 oz

The SCS ARC compression clamp from Tilt Scooters features a profile machined face, and is structurally balanced putting the material and strength where needed. The Tilt Arc SCS uses the same custom bolts as the Classic SCS with a 6mm hex key drive and 50% larger threads provide more clamping power and help keep the compression tight and bars in place. Every clamp bolt from Tilt comes with pre-applied anti-seize to prevent them from seizing to the clamp. For added compatibility, the removable shim allows use with both size handlebars.
- Material: 6061-T6 Aluminum
- Colors: Black, Gray, Red, Gold, Blue, Purple
- Height: 3.0″
- Compatibility: Regular (1-1/4″) & oversized (1-3/8″) handlebars
- Weight: 7.9 oz