Envy Scooter Double Clamp Teal Oversized And Standard

The best grips money can buy!

Technical specifications :

- Lenght : 170 mm
- Diameter : 33 mm
- Silicon bar ends
- Weight : 150 g

Root Industries griptape is 20" long and 4.75" wide, which is long and wide enough to fit on pretty much every deck.

The Root Industries griptape is high quality griptape with 'stongbond' glue, guaranteeing it will stick hard to your scooter deck. Featuring the Root Industries logo laser cut out of the centre of the griptape, this griptape looks awesome on any deck.

This product is in stock and ready to post to you.

7.75" Width

NOTE : Stain may vary.

The Heat Finish colorway is one of a kind, literally every bar has a different variation and they all look badass. This colorway is painstakingly made by hand. The price is slightly higher due to the added care and hands on application. These bars will only be produced in limited quatities and will only be available for a limited time at retailers.

The Classic T bar boasts a thick .083” Crossbar. By using this thickness the bar is able to maintain strength while enabling that classic T bar look. The steerer tube is a .058 thick” and fits nicely on most compression systems. This combination of wall thicknesses and quality welding creates a superior T bar.

The bar is protected with a Gloss clear coat to protect the Chromoly Steel from rusting and it creates a look unique to Affinity. If you’re looking for a high quality T bar that will last then look no further. Affinity is the right choice for you.

Oversized and fits oversized SCS, you will need to cut a slit for HIC.

Made from resilient Chromoly Steel
710mm high x 610mm wide
.083” Crossbar for superior strength
.058” Steerer tube for weight savings and compatibility
High Quality Powder Coat
Locally made in Southern California
Rider owned and operated Company with years of professional experience

The Heat Finish colorway is one of a kind, literally every bar has a different variation and they all look badass. This colorway is painstakingly made by hand. The price is slightly higher due to the added care and hands on application. These bars will only be produced in limited quatities and will only be available for a limited time at retailers.

The Classic T bar boasts a thick .083” Crossbar. By using this thickness the bar is able to maintain strength while enabling that classic T bar look. The steerer tube is a .058 thick” and fits nicely on most compression systems. This combination of wall thicknesses and quality welding creates a superior T bar.

The bar is protected with a Gloss clear coat to protect the Chromoly Steel from rusting and it creates a look unique to Affinity. If you’re looking for a high quality T bar that will last then look no further. Affinity is the right choice for you.

Oversized and fits oversized SCS, you will need to cut a slit for HIC.

Made from resilient Chromoly Steel
710mm high x 610mm wide
.083” Crossbar for superior strength
.058” Steerer tube for weight savings and compatibility
High Quality Powder Coat
Locally made in Southern California
Rider owned and operated Company with years of professional experience

The Heat Finish colorway is one of a kind, literally every bar has a different variation and they all look badass. This colorway is painstakingly made by hand. The price is slightly higher due to the added care and hands on application. These bars will only be produced in limited quatities and will only be available for a limited time at retailers.

The Classic T bar boasts a thick .083” Crossbar. By using this thickness the bar is able to maintain strength while enabling that classic T bar look. The steerer tube is a .058 thick” and fits nicely on most compression systems. This combination of wall thicknesses and quality welding creates a superior T bar.

The bar is protected with a Gloss clear coat to protect the Chromoly Steel from rusting and it creates a look unique to Affinity. If you’re looking for a high quality T bar that will last then look no further. Affinity is the right choice for you.

Oversized and fits oversized SCS, you will need to cut a slit for HIC.

Made from resilient Chromoly Steel
710mm high x 610mm wide
.083” Crossbar for superior strength
.058” Steerer tube for weight savings and compatibility
High Quality Powder Coat
Locally made in Southern California
Rider owned and operated Company with years of professional experience

Set of 2 wheels with pre-installed Envy Abec 9 bearings

Straight from Envy's awesome 2017 range of products, here we have the new 120mm Hollow core wheels.

Features:

- Toughened Anodized finish
- 120mm Diameter
- Lightweight design
- 86a Urethane
- Includes Abec 9 Bearings
- Only compatible with 120mm setups

The Heat Finish colorway is one of a kind, literally every bar has a different variation and they all look badass. This colorway is painstakingly made by hand. The price is slightly higher due to the added care and hands on application. These bars will only be produced in limited quatities and will only be available for a limited time at retailers.

The Classic T bar boasts a thick .083” Crossbar. By using this thickness the bar is able to maintain strength while enabling that classic T bar look. The steerer tube is a .058 thick” and fits nicely on most compression systems. This combination of wall thicknesses and quality welding creates a superior T bar.

The bar is protected with a Gloss clear coat to protect the Chromoly Steel from rusting and it creates a look unique to Affinity. If you’re looking for a high quality T bar that will last then look no further. Affinity is the right choice for you.

Oversized and fits oversized SCS, you will need to cut a slit for HIC.

Made from resilient Chromoly Steel
710mm high x 610mm wide
.083” Crossbar for superior strength
.058” Steerer tube for weight savings and compatibility
High Quality Powder Coat
Locally made in Southern California
Rider owned and operated Company with years of professional experience