Carver Skateboard Complete Kerrzy Snapper With Cx Trucks Silver

$399.99
Sold Out
same day dispatch tick Free Shipping Australia Wide Orders Over $99
trusted australian business tick Need Help? Customer Support (07) 5641-1535

Completely assembled and ready to ride.

When we met with Josh Kerr to session design ideas for his new models we were stoked to find that he already had a strong vision for this model. The first thing he said was how much he liked riding the little board we had given his son. He loved how snappy it was, and told us how much pumping he did just in his driveway. We love that too, so we were stoked to make one for him. Plus he said because it was small it was easy to bring along on trips and ride anywhere in the world. But since this is a mini for Josh we added a little bit of width for better board control, while not adding too much so it stayed small and light. And when it came to graphics he wanted to use a photo by his friend and filmer Matt Kleiner, so we worked with Matt to get the perfect shot of Josh doing what he does best; flying over the lip.

- 28" long
- 9 3/4” wide
- 5 1/2" tail
- 3 1/2" nose
- 14 7/8" wheelbase

What’s the difference between the C7 and the CX?

The C7 is Carver's signature surfskate front truck, stuff and it has an incredible amount of pump and turning radius. It has a spring loaded swing arm that allows the nose of the board to sway slightly from side to side, essentially allowing you to snap your turns from the tail and pump effortlessly for speed.

The CX is Carver's reverse-kingpin surfskate front truck, and it also has more pump and tighter turning than any other reverse kingpin truck on the market, but without any other parts. It has a similar feel to the C7 but is less extreme, so if you want a more familiar feel to your board but want to pump and surf, then the CX is the truck you want.

90 day returns tick 90 Day Returns Money Back Guarantee
afterpay tick Afterpay & Zip Pay Shop Now, Take Now, Pay Later
world wide shipping tick World Wide Shipping NZ, USA, Canada, UK, Europe, ASIA + More

(CARVERKERRZYCX)

SHIPPING COSTS

AUSTRALIA
FREE SHIPPING on all orders over $99.
$10 FLAT RATE on all orders under $99.
Express Delivery from $10.

NEW ZEALAND EXPRESS COURIER
$10 FLAT RATE or FREE SHIPPING on all orders over $199.

WORLDWIDE EXPRESS COURIER
$50 flat rate on all orders.

All orders are dispatched promptly after you place your order.

ESTIMATED DELIVERY TIMES

Delivery times below may be affected by delays due to Covid situation.

NSW - 1 to 4 working days
ACT - 1 to 4 working days
QLD - 1 to 4 working days
VIC - 2 to 5 working days
SA - 2 to 6 working days
WA - 5 to 8 working days
NT - 5 to 9 working days
TAS - 5 to 9 working days

NZ - 2 to 4 working days
ASIA - 2 to 6 working days
USA - 3 to 7 working days
UK - 4 to 8 working days
EURO - 4 to 8 working days

PAYMENT INFO

All payments are secure and protected by our sitewide HTTPS.

We accept following payment methods for Australian and NZ orders;

PayPal
Visa
MasterCard
Afterpay - Buy Now Pay Later
ZipPay - Buy Now Pay Later

International orders we only accept PayPal as payment method.


More From This Category


 Z-Flex Complete Cruiser Skateboard Aragon Cheetah 80s Frog 31

The Goodstock off white skateboard is a classic Resin-7 rock maple complete featuring ABEC-7 bearings, 5.0" Tensor alloy trucks, 52mm 99a wheels and matte finish.

8" x 31.63"
14" Wheel Base

 Z-Flex Complete Cruiser Skateboard Jay Adams Metalflake Blue 29

The Goodstock off white skateboard is a classic Resin-7 rock maple complete featuring ABEC-7 bearings, 5.0" Tensor alloy trucks, 52mm 99a wheels and matte finish.

8" x 31.63"
14" Wheel Base

 Z-Flex Complete Cruiser Skateboard Jay Adams Metalflake Gold 29

The Goodstock off white skateboard is a classic Resin-7 rock maple complete featuring ABEC-7 bearings, 5.0" Tensor alloy trucks, 52mm 99a wheels and matte finish.

8" x 31.63"
14" Wheel Base

 Z-Flex Complete Cruiser Skateboard Jay Adams POP Olive 29

The Goodstock off white skateboard is a classic Resin-7 rock maple complete featuring ABEC-7 bearings, 5.0" Tensor alloy trucks, 52mm 99a wheels and matte finish.

8" x 31.63"
14" Wheel Base

 Z-Flex Complete Cruiser Skateboard Jay Adams Shadow Lurker 29

The Goodstock off white skateboard is a classic Resin-7 rock maple complete featuring ABEC-7 bearings, 5.0" Tensor alloy trucks, 52mm 99a wheels and matte finish.

8" x 31.63"
14" Wheel Base


We Also Recommend


Bones Reds Skateboard Scooter Bearings 8 Pack Genuine

Resin Hybrid Maple Construction.
7-ply 100% Hardrock & Canadian Maple with Epoxy Resin Glue.
Single Deck Press (Same shape and concave every time).


Width: 8.25"
Length: 32.1"
Wheelbase: 14.25"

 

 

Santa Cruz Socks 4 Pairs Black

Santa Cruz Socks 4 Pairs Black

$19.99

Resin Hybrid Maple Construction.
7-ply 100% Hardrock & Canadian Maple with Epoxy Resin Glue.
Single Deck Press (Same shape and concave every time).


Width: 8.25"
Length: 32.1"
Wheelbase: 14.25"

 

 

Modus Skateboard Skate Tool Black Australian Brand

Resin Hybrid Maple Construction.
7-ply 100% Hardrock & Canadian Maple with Epoxy Resin Glue.
Single Deck Press (Same shape and concave every time).


Width: 8.25"
Length: 32.1"
Wheelbase: 14.25"

 

 

Element Wax Cube Wax

Element Wax Cube Wax

$2.49

Resin Hybrid Maple Construction.
7-ply 100% Hardrock & Canadian Maple with Epoxy Resin Glue.
Single Deck Press (Same shape and concave every time).


Width: 8.25"
Length: 32.1"
Wheelbase: 14.25"

 

 

Nitro Circus Mini Launch Ramp

Nitro Circus Mini Launch Ramp

$69.99

Resin Hybrid Maple Construction.
7-ply 100% Hardrock & Canadian Maple with Epoxy Resin Glue.
Single Deck Press (Same shape and concave every time).


Width: 8.25"
Length: 32.1"
Wheelbase: 14.25"