Carver Skateboard Complete Firefly With Cx Trucks Silver

$459.99
Sold Out
same day dispatch tick Free Shipping Australia Wide Orders Over $99
trusted australian business tick Need Help? Customer Support (07) 5641-1535

Completely assembled and ready to ride.

Sometimes you want to dial in your wheelbase just so, and full-inch sizes are not specific enough. With the 30.25” Firefly we’ve shaved ¾” off our popular 31 Resin to make this board even snappier while still retaining the same progressive shape of an archetypal squash tail. The narrower nose keeps the front of the board light and nimble, while the proper kick tail is a wedged deckpad that locks in your back foot where it counts, giving you leverage into any tail-driven trick. From boneless air grabs and ollies to bank and ditch surfing, this little board is a true surfskate. Practice the same tricks you want to perfect in the water, plus work on flow, trim and power carves. With a 16 ½” wheelbase you get a little more stability than other shorties, but not so much that you lose the super easy pump and the driveway-tight carving. Recommended with the CX truck set for a more progressive skate performance.

- 30.25" long
- 9 3/4" wide
- 6 1/4" tail
- 3 3/8" nose
- 16 1/2" wheelbase

What’s the difference between the C7 and the CX?

The C7 is Carver's signature surfskate front truck, stuff and it has an incredible amount of pump and turning radius. It has a spring loaded swing arm that allows the nose of the board to sway slightly from side to side, essentially allowing you to snap your turns from the tail and pump effortlessly for speed.

The CX is Carver's reverse-kingpin surfskate front truck, and it also has more pump and tighter turning than any other reverse kingpin truck on the market, but without any other parts. It has a similar feel to the C7 but is less extreme, so if you want a more familiar feel to your board but want to pump and surf, then the CX is the truck you want.

90 day returns tick 90 Day Returns Money Back Guarantee
afterpay tick Afterpay & Zip Pay Shop Now, Take Now, Pay Later
world wide shipping tick World Wide Shipping NZ, USA, Canada, UK, Europe, ASIA + More

(CARVERFIREFLYCX)

SHIPPING COSTS

AUSTRALIA
FREE SHIPPING on all orders over $49 (or $10 under $49).
$15 EXPRESS POST flat rate per order

NEW ZEALAND EXPRESS COURIER
$15 FLAT RATE or FREE SHIPPING on all orders over $99.

WORLDWIDE EXPRESS COURIER
$30 to USA/Canada/Asia and $60 to rest of the world.

All orders are dispatched promptly after you place your order.

ESTIMATED DELIVERY TIMES

Delivery times below may be affected by delays due to Covid situation.

NSW - 1 to 4 working days
ACT - 1 to 4 working days
QLD - 1 to 4 working days
VIC - 2 to 5 working days
SA - 2 to 6 working days
WA - 5 to 8 working days
NT - 5 to 9 working days
TAS - 5 to 9 working days

NZ - 2 to 4 working days
ASIA - 2 to 6 working days
USA - 3 to 7 working days
UK - 4 to 8 working days
EURO - 4 to 8 working days

PAYMENT INFO

All payments are secure and protected by our sitewide HTTPS.

We accept following payment methods;

PayPal
Visa
MasterCard
American Express
Apple Pay
Google Pay
Afterpay - Buy Now Pay Later
ZipPay - Buy Now Pay Later


Others Also Bought


Carver Triton Skateboard Complete Surfskate Spectral 30 Cx Trucks Raw

Carver Triton Skateboard Complete Surfskate Spectral 30 Cx Trucks Raw

$299.99
RRP $329.99
SAVE $30.00 (9%)

The surf is flat as a tack and you and the boys were keen on gettin’ out there, grab the mushburger and turn any suburban driveway into a perfect left that’s breaking all day. A new addition to our 2021 Surf Skate range, inspired by shortboards of the 80’s and 90’s the Mushburger features a super aggressive swallow tail shape perfect for nailing that extended layback. Complete with Ogre Surf Skate Trucks, 62mm NANA Bludgers and NANA x DSCO Built-Ins.

WIDTH LENGTH WHEEL SPECS
10" 32" 62mm 82A Nana Bludgers

More From This Category



We Also Recommend


Bones Reds Skateboard Scooter Bearings 8 Pack Genuine

Santa Cruz Skateboards was founded in 1973 by Rich Novak, Doug Haut and Jay Shuirman. Santa Cruz also employed legendary artist Jim Phillips to create most of the brands early graphics, most notably their iconic "Screaming Hand" graphic. As one of the oldest skateboard brands in existence, Santa Cruz draws from a wealth of experience in skateboarding to bring you a range of top-quality boards. Along with their trademark line, Santa Cruz also offers a broad range of boards in varying shapes and sizes.

WIDTH LENGTH WHEELBASE
     
Santa Cruz Socks 4 Pairs Black

Santa Cruz Socks 4 Pairs Black

$19.99

Key Features:

Total Scooter Height: 800mm
Suggested Ages: 6-12 Years
Bars Spins 360 Degrees for Tricks
Total Scooter Weight: 3.6kgs
Scooter Type: Fixed 1 piece Stunt Scooter that's not foldable, with fixed handlebar size (can but cut down after purchase)
Scooter come pre-dialled, 95% built, all that's needed to do is put the bars on, tighten then clamp then you're off


Specification:

Deck: 6061-T6, 110mm x 495mm (4.3 x 19.5”) with front and rear angled deck inserts.
Headset: Slim stack IHC head set.
Brake: Invert V3 Steel pressed underside bolt.
Bars: Hi Ten steel “T” bar (H)580 x (W)520mm.
Grips: Invert 165mm TPR 25A With TPE bar ends.
Clamp: 2 bolt 6061-T6 Aluminium.
Fork: Invert V3 reinforced steel with cut outs 120mm wheel compatible.
Wheel: Polycarbonate hollow core.
PU: 110mm, 86a Poly Urethane.
Bearing: ABEC 7 chrome steel.

Modus Skateboard Skate Tool Black Australian Brand

Santa Cruz Skateboards was founded in 1973 by Rich Novak, Doug Haut and Jay Shuirman. Santa Cruz also employed legendary artist Jim Phillips to create most of the brands early graphics, most notably their iconic "Screaming Hand" graphic. As one of the oldest skateboard brands in existence, Santa Cruz draws from a wealth of experience in skateboarding to bring you a range of top-quality boards. Along with their trademark line, Santa Cruz also offers a broad range of boards in varying shapes and sizes.

WIDTH LENGTH WHEELBASE
     
Element Wax Cube Wax

Key Features:

Total Scooter Height: 800mm
Suggested Ages: 6-12 Years
Bars Spins 360 Degrees for Tricks
Total Scooter Weight: 3.6kgs
Scooter Type: Fixed 1 piece Stunt Scooter that's not foldable, with fixed handlebar size (can but cut down after purchase)
Scooter come pre-dialled, 95% built, all that's needed to do is put the bars on, tighten then clamp then you're off


Specification:

Deck: 6061-T6, 110mm x 495mm (4.3 x 19.5”) with front and rear angled deck inserts.
Headset: Slim stack IHC head set.
Brake: Invert V3 Steel pressed underside bolt.
Bars: Hi Ten steel “T” bar (H)580 x (W)520mm.
Grips: Invert 165mm TPR 25A With TPE bar ends.
Clamp: 2 bolt 6061-T6 Aluminium.
Fork: Invert V3 reinforced steel with cut outs 120mm wheel compatible.
Wheel: Polycarbonate hollow core.
PU: 110mm, 86a Poly Urethane.
Bearing: ABEC 7 chrome steel.

Nitro Circus Mini Launch Ramp

Nitro Circus Mini Launch Ramp

$59.99

Key Features:

Total Scooter Height: 800mm
Suggested Ages: 6-12 Years
Bars Spins 360 Degrees for Tricks
Total Scooter Weight: 3.6kgs
Scooter Type: Fixed 1 piece Stunt Scooter that's not foldable, with fixed handlebar size (can but cut down after purchase)
Scooter come pre-dialled, 95% built, all that's needed to do is put the bars on, tighten then clamp then you're off


Specification:

Deck: 6061-T6, 110mm x 495mm (4.3 x 19.5”) with front and rear angled deck inserts.
Headset: Slim stack IHC head set.
Brake: Invert V3 Steel pressed underside bolt.
Bars: Hi Ten steel “T” bar (H)580 x (W)520mm.
Grips: Invert 165mm TPR 25A With TPE bar ends.
Clamp: 2 bolt 6061-T6 Aluminium.
Fork: Invert V3 reinforced steel with cut outs 120mm wheel compatible.
Wheel: Polycarbonate hollow core.
PU: 110mm, 86a Poly Urethane.
Bearing: ABEC 7 chrome steel.