Carver Skateboard Complete Firefly With C7 Trucks Silver

$499.99
Sold Out
same day dispatch tick Free Shipping Australia Wide Orders Over $99
trusted australian business tick Need Help? Customer Support (07) 5641-1535

Completely assembled and ready to ride.

Sometimes you want to dial in your wheelbase just so, and full-inch sizes are not specific enough. With the 30.25” Firefly we’ve shaved ¾” off our popular 31 Resin to make this board even snappier while still retaining the same progressive shape of an archetypal squash tail. The narrower nose keeps the front of the board light and nimble, while the proper kick tail is a wedged deckpad that locks in your back foot where it counts, giving you leverage into any tail-driven trick. From boneless air grabs and ollies to bank and ditch surfing, this little board is a true surfskate. Practice the same tricks you want to perfect in the water, plus work on flow, trim and power carves. With a 16 ½” wheelbase you get a little more stability than other shorties, but not so much that you lose the super easy pump and the driveway-tight carving. Recommended with the CX truck set for a more progressive skate performance.

- 30.25" long
- 9 3/4" wide
- 6 1/4" tail
- 3 3/8" nose
- 16 1/2" wheelbase

What’s the difference between the C7 and the CX?

The C7 is Carver's signature surfskate front truck, stuff and it has an incredible amount of pump and turning radius. It has a spring loaded swing arm that allows the nose of the board to sway slightly from side to side, essentially allowing you to snap your turns from the tail and pump effortlessly for speed.

The CX is Carver's reverse-kingpin surfskate front truck, and it also has more pump and tighter turning than any other reverse kingpin truck on the market, but without any other parts. It has a similar feel to the C7 but is less extreme, so if you want a more familiar feel to your board but want to pump and surf, then the CX is the truck you want.

90 day returns tick 90 Day Returns Money Back Guarantee
afterpay tick Afterpay & Zip Pay Shop Now, Take Now, Pay Later
world wide shipping tick World Wide Shipping NZ, USA, Canada, UK, Europe, ASIA + More

(CARVERFIREFLYC7)

SHIPPING COSTS

AUSTRALIA
FREE SHIPPING on all orders over $49 (or $10 under $49).
$15 EXPRESS POST flat rate per order

NEW ZEALAND EXPRESS COURIER
$15 FLAT RATE or FREE SHIPPING on all orders over $99.

WORLDWIDE EXPRESS COURIER
$30 to USA/Canada/Asia and $60 to rest of the world.

All orders are dispatched promptly after you place your order.

ESTIMATED DELIVERY TIMES

Delivery times below may be affected by delays due to Covid situation.

NSW - 1 to 4 working days
ACT - 1 to 4 working days
QLD - 1 to 4 working days
VIC - 2 to 5 working days
SA - 2 to 6 working days
WA - 5 to 8 working days
NT - 5 to 9 working days
TAS - 5 to 9 working days

NZ - 2 to 4 working days
ASIA - 2 to 6 working days
USA - 3 to 7 working days
UK - 4 to 8 working days
EURO - 4 to 8 working days

PAYMENT INFO

All payments are secure and protected by our sitewide HTTPS.

We accept following payment methods;

PayPal
Visa
MasterCard
American Express
Apple Pay
Google Pay
Afterpay - Buy Now Pay Later
ZipPay - Buy Now Pay Later


More From This Category


 Kick Push Skateboard Deck 8.0 Generator USA Made

Powell-Peralta's impact on skateboarding is unmatched. Founded in 1978, by George Powell and Stacy Peralta, high-quality innovative products are the foundation of Powell-Peralta's success. That is followed closely by a top-notch roster of team members (past and present). Powell Peralta is re-issuing some of the most popular and classic skateboards of all time along with wheels, soft goods, and many more must-have collectibles.

Powell Peralta® decks are made in the USA at our skateboard manufacturing facility in Santa Barbara, CA. Materials include U.S. hard rock maple, high strength fiberglass, AirLam fused with epoxy resin and are warranted against delamination for their useful life. Our graphics are created in-house using non-solvent based inks and paints to keep our atmosphere cleaner.

FLIGHT™ decks are:

  • Thinner - as thin as your phone
  • Stronger - more than twice as strong in our tail break tests
  • Longer lasting - The epoxy infused, fiber reinforced structure of the Flight deck is extremely resistant to breaking, and this structure gives Flight decks "everlasting pop" that doesn't fade as your Flight deck slowly wears.
  • Ollies higher because of greater rebound and snap.
  • Team testing suggests that Flight decks will last several times as long as a 7-ply, making them a great value as well as a superior performing skateboard.
WIDTH LENGTH WHEELBASE
8.25" 31.95" 14.25'

 

 Kick Push Skateboard Deck 8.25 Generator USA Made

Powell-Peralta's impact on skateboarding is unmatched. Founded in 1978, by George Powell and Stacy Peralta, high-quality innovative products are the foundation of Powell-Peralta's success. That is followed closely by a top-notch roster of team members (past and present). Powell Peralta is re-issuing some of the most popular and classic skateboards of all time along with wheels, soft goods, and many more must-have collectibles.

Powell Peralta® decks are made in the USA at our skateboard manufacturing facility in Santa Barbara, CA. Materials include U.S. hard rock maple, high strength fiberglass, AirLam fused with epoxy resin and are warranted against delamination for their useful life. Our graphics are created in-house using non-solvent based inks and paints to keep our atmosphere cleaner.

FLIGHT™ decks are:

  • Thinner - as thin as your phone
  • Stronger - more than twice as strong in our tail break tests
  • Longer lasting - The epoxy infused, fiber reinforced structure of the Flight deck is extremely resistant to breaking, and this structure gives Flight decks "everlasting pop" that doesn't fade as your Flight deck slowly wears.
  • Ollies higher because of greater rebound and snap.
  • Team testing suggests that Flight decks will last several times as long as a 7-ply, making them a great value as well as a superior performing skateboard.
WIDTH LENGTH WHEELBASE
8.25" 31.95" 14.25'

 

 Kick Push Skateboard Deck 8.38 Generator USA Made

Powell-Peralta's impact on skateboarding is unmatched. Founded in 1978, by George Powell and Stacy Peralta, high-quality innovative products are the foundation of Powell-Peralta's success. That is followed closely by a top-notch roster of team members (past and present). Powell Peralta is re-issuing some of the most popular and classic skateboards of all time along with wheels, soft goods, and many more must-have collectibles.

Powell Peralta® decks are made in the USA at our skateboard manufacturing facility in Santa Barbara, CA. Materials include U.S. hard rock maple, high strength fiberglass, AirLam fused with epoxy resin and are warranted against delamination for their useful life. Our graphics are created in-house using non-solvent based inks and paints to keep our atmosphere cleaner.

FLIGHT™ decks are:

  • Thinner - as thin as your phone
  • Stronger - more than twice as strong in our tail break tests
  • Longer lasting - The epoxy infused, fiber reinforced structure of the Flight deck is extremely resistant to breaking, and this structure gives Flight decks "everlasting pop" that doesn't fade as your Flight deck slowly wears.
  • Ollies higher because of greater rebound and snap.
  • Team testing suggests that Flight decks will last several times as long as a 7-ply, making them a great value as well as a superior performing skateboard.
WIDTH LENGTH WHEELBASE
8.25" 31.95" 14.25'

 

 Kick Push Skateboard Deck 8.5 Generator USA Made

Powell-Peralta's impact on skateboarding is unmatched. Founded in 1978, by George Powell and Stacy Peralta, high-quality innovative products are the foundation of Powell-Peralta's success. That is followed closely by a top-notch roster of team members (past and present). Powell Peralta is re-issuing some of the most popular and classic skateboards of all time along with wheels, soft goods, and many more must-have collectibles.

Powell Peralta® decks are made in the USA at our skateboard manufacturing facility in Santa Barbara, CA. Materials include U.S. hard rock maple, high strength fiberglass, AirLam fused with epoxy resin and are warranted against delamination for their useful life. Our graphics are created in-house using non-solvent based inks and paints to keep our atmosphere cleaner.

FLIGHT™ decks are:

  • Thinner - as thin as your phone
  • Stronger - more than twice as strong in our tail break tests
  • Longer lasting - The epoxy infused, fiber reinforced structure of the Flight deck is extremely resistant to breaking, and this structure gives Flight decks "everlasting pop" that doesn't fade as your Flight deck slowly wears.
  • Ollies higher because of greater rebound and snap.
  • Team testing suggests that Flight decks will last several times as long as a 7-ply, making them a great value as well as a superior performing skateboard.
WIDTH LENGTH WHEELBASE
8.25" 31.95" 14.25'

 

$lave Skateboard Deck Copy Machine Burke 8.375 Stain May Vary

Powell-Peralta's impact on skateboarding is unmatched. Founded in 1978, by George Powell and Stacy Peralta, high-quality innovative products are the foundation of Powell-Peralta's success. That is followed closely by a top-notch roster of team members (past and present). Powell Peralta is re-issuing some of the most popular and classic skateboards of all time along with wheels, soft goods, and many more must-have collectibles.

Powell Peralta® decks are made in the USA at our skateboard manufacturing facility in Santa Barbara, CA. Materials include U.S. hard rock maple, high strength fiberglass, AirLam fused with epoxy resin and are warranted against delamination for their useful life. Our graphics are created in-house using non-solvent based inks and paints to keep our atmosphere cleaner.

FLIGHT™ decks are:

  • Thinner - as thin as your phone
  • Stronger - more than twice as strong in our tail break tests
  • Longer lasting - The epoxy infused, fiber reinforced structure of the Flight deck is extremely resistant to breaking, and this structure gives Flight decks "everlasting pop" that doesn't fade as your Flight deck slowly wears.
  • Ollies higher because of greater rebound and snap.
  • Team testing suggests that Flight decks will last several times as long as a 7-ply, making them a great value as well as a superior performing skateboard.
WIDTH LENGTH WHEELBASE
8.25" 31.95" 14.25'

 


We Also Recommend


Bones Reds Skateboard Scooter Bearings 8 Pack Genuine

Powell-Peralta's impact on skateboarding is unmatched. Founded in 1978, by George Powell and Stacy Peralta, high-quality innovative products are the foundation of Powell-Peralta's success. That is followed closely by a top-notch roster of team members (past and present). Powell Peralta is re-issuing some of the most popular and classic skateboards of all time along with wheels, soft goods, and many more must-have collectibles.

Powell Peralta® decks are made in the USA at our skateboard manufacturing facility in Santa Barbara, CA. Materials include U.S. hard rock maple, high strength fiberglass, AirLam fused with epoxy resin and are warranted against delamination for their useful life. Our graphics are created in-house using non-solvent based inks and paints to keep our atmosphere cleaner.

FLIGHT™ decks are:

  • Thinner - as thin as your phone
  • Stronger - more than twice as strong in our tail break tests
  • Longer lasting - The epoxy infused, fiber reinforced structure of the Flight deck is extremely resistant to breaking, and this structure gives Flight decks "everlasting pop" that doesn't fade as your Flight deck slowly wears.
  • Ollies higher because of greater rebound and snap.
  • Team testing suggests that Flight decks will last several times as long as a 7-ply, making them a great value as well as a superior performing skateboard.
WIDTH LENGTH WHEELBASE
8.25" 31.95" 14.25'

 

Santa Cruz Socks 4 Pairs Black

Santa Cruz Socks 4 Pairs Black

$19.99

This Prodigy Series 8 now features a Street edition range with street specific components.

This range is suited to the intermediate to advanced rider ready to progress their riding within the street scene.

The edition includes all the great upgrades to the standard edition with some street specific components. The Prodigy 6061-T6 Extruded Aluminium deck with base cut out is longer and wider and includes our Nylon Boxed Ends, Topping the scooter is 4130 Cro-Mo T style Thermal bars wrapped in a Two Bolt 6061 Aluminium standard clamp and TPR Hand Grips. The complete is rolling on 120mm x 24mm GAP core wheels with the best 86a grade Polyurethane and ABEC 9 bearings. ALU Prodigy V2 IHC Forks compatible with up to 125mm x 30mm wheels. See our full dimension specifications below. 

  • PRODIGY Series 8- Street Edition
  • The Prodigy Series 8 Street edition is available in Grey/Teal & Black/Gold colourways
  • Prodigy FORGED Head tube
  • 6 Series Alu Prodigy deck | angle 82.5° |width 125mm/4.9" | length 510mm/20.25" | Nylon Bolt on brake system and Boxed Ends 
  • 6 Series Alu Forged Prodigy IHC fork- Compatible up to 125 x 30mm wheels.
  • 4130 Cro-mo Thermal bars 650mm/25.6" high x 580mm/22.8" wide
  • TPR hand grips 160mm long with nylon bar ends
  • 2 bolt Prodigy Clamp- 6mm bolts
  • Fully sealed integrated headset
  • 120 mm x 24mm GAP wheels 86A PU- ABEC 9 bearings
  • High quality grip tape
  • Nylon front plate and rear inserts
  • Weight 3.95kgs/ 8.7 pounds
  • Total Height: 900mm/34.6”
  • Total Length: 700mm/27.6”
  • Foot Space: 350mm/13.4”
Element Wax Cube Wax

This Prodigy Series 8 now features a Street edition range with street specific components.

This range is suited to the intermediate to advanced rider ready to progress their riding within the street scene.

The edition includes all the great upgrades to the standard edition with some street specific components. The Prodigy 6061-T6 Extruded Aluminium deck with base cut out is longer and wider and includes our Nylon Boxed Ends, Topping the scooter is 4130 Cro-Mo T style Thermal bars wrapped in a Two Bolt 6061 Aluminium standard clamp and TPR Hand Grips. The complete is rolling on 120mm x 24mm GAP core wheels with the best 86a grade Polyurethane and ABEC 9 bearings. ALU Prodigy V2 IHC Forks compatible with up to 125mm x 30mm wheels. See our full dimension specifications below. 

  • PRODIGY Series 8- Street Edition
  • The Prodigy Series 8 Street edition is available in Grey/Teal & Black/Gold colourways
  • Prodigy FORGED Head tube
  • 6 Series Alu Prodigy deck | angle 82.5° |width 125mm/4.9" | length 510mm/20.25" | Nylon Bolt on brake system and Boxed Ends 
  • 6 Series Alu Forged Prodigy IHC fork- Compatible up to 125 x 30mm wheels.
  • 4130 Cro-mo Thermal bars 650mm/25.6" high x 580mm/22.8" wide
  • TPR hand grips 160mm long with nylon bar ends
  • 2 bolt Prodigy Clamp- 6mm bolts
  • Fully sealed integrated headset
  • 120 mm x 24mm GAP wheels 86A PU- ABEC 9 bearings
  • High quality grip tape
  • Nylon front plate and rear inserts
  • Weight 3.95kgs/ 8.7 pounds
  • Total Height: 900mm/34.6”
  • Total Length: 700mm/27.6”
  • Foot Space: 350mm/13.4”
Nitro Circus Mini Launch Ramp

Nitro Circus Mini Launch Ramp

$59.99

This Prodigy Series 8 now features a Street edition range with street specific components.

This range is suited to the intermediate to advanced rider ready to progress their riding within the street scene.

The edition includes all the great upgrades to the standard edition with some street specific components. The Prodigy 6061-T6 Extruded Aluminium deck with base cut out is longer and wider and includes our Nylon Boxed Ends, Topping the scooter is 4130 Cro-Mo T style Thermal bars wrapped in a Two Bolt 6061 Aluminium standard clamp and TPR Hand Grips. The complete is rolling on 120mm x 24mm GAP core wheels with the best 86a grade Polyurethane and ABEC 9 bearings. ALU Prodigy V2 IHC Forks compatible with up to 125mm x 30mm wheels. See our full dimension specifications below. 

  • PRODIGY Series 8- Street Edition
  • The Prodigy Series 8 Street edition is available in Grey/Teal & Black/Gold colourways
  • Prodigy FORGED Head tube
  • 6 Series Alu Prodigy deck | angle 82.5° |width 125mm/4.9" | length 510mm/20.25" | Nylon Bolt on brake system and Boxed Ends 
  • 6 Series Alu Forged Prodigy IHC fork- Compatible up to 125 x 30mm wheels.
  • 4130 Cro-mo Thermal bars 650mm/25.6" high x 580mm/22.8" wide
  • TPR hand grips 160mm long with nylon bar ends
  • 2 bolt Prodigy Clamp- 6mm bolts
  • Fully sealed integrated headset
  • 120 mm x 24mm GAP wheels 86A PU- ABEC 9 bearings
  • High quality grip tape
  • Nylon front plate and rear inserts
  • Weight 3.95kgs/ 8.7 pounds
  • Total Height: 900mm/34.6”
  • Total Length: 700mm/27.6”
  • Foot Space: 350mm/13.4”