Carver Skateboard Complete Firefly With C7 Trucks Black
Completely assembled and ready to ride.
Sometimes you want to dial in your wheelbase just so, and full-inch sizes are not specific enough. With the 30.25” Firefly we’ve shaved ¾” off our popular 31 Resin to make this board even snappier while still retaining the same progressive shape of an archetypal squash tail. The narrower nose keeps the front of the board light and nimble, while the proper kick tail is a wedged deckpad that locks in your back foot where it counts, giving you leverage into any tail-driven trick. From boneless air grabs and ollies to bank and ditch surfing, this little board is a true surfskate. Practice the same tricks you want to perfect in the water, plus work on flow, trim and power carves. With a 16 ½” wheelbase you get a little more stability than other shorties, but not so much that you lose the super easy pump and the driveway-tight carving. Recommended with the CX truck set for a more progressive skate performance.
- 30.25" long
- 9 3/4" wide
- 6 1/4" tail
- 3 3/8" nose
- 16 1/2" wheelbase
What’s the difference between the C7 and the CX?
The C7 is Carver's signature surfskate front truck, stuff and it has an incredible amount of pump and turning radius. It has a spring loaded swing arm that allows the nose of the board to sway slightly from side to side, essentially allowing you to snap your turns from the tail and pump effortlessly for speed.
The CX is Carver's reverse-kingpin surfskate front truck, and it also has more pump and tighter turning than any other reverse kingpin truck on the market, but without any other parts. It has a similar feel to the C7 but is less extreme, so if you want a more familiar feel to your board but want to pump and surf, then the CX is the truck you want.



(CARVERFIREFLYBLACKTRUCKSC)
SHIPPING COSTS
AUSTRALIA
FREE SHIPPING on all orders over $99.
$10 FLAT RATE on all orders under $99.
Express Delivery from $10.
NEW ZEALAND EXPRESS COURIER
$10 FLAT RATE or FREE SHIPPING on all orders over $199.
WORLDWIDE EXPRESS COURIER
$50 flat rate on all orders.
All orders are dispatched promptly after you place your order.
ESTIMATED DELIVERY TIMES
Delivery times below may be affected by delays due to Covid situation.
NSW - 1 to 4 working days ACT - 1 to 4 working days QLD - 1 to 4 working days VIC - 2 to 5 working days SA - 2 to 6 working days WA - 5 to 8 working days NT - 5 to 9 working days TAS - 5 to 9 working days NZ - 2 to 4 working days ASIA - 2 to 6 working days USA - 3 to 7 working days UK - 4 to 8 working days EURO - 4 to 8 working days
PAYMENT INFO
All payments are secure and protected by our sitewide HTTPS. We accept following payment methods for Australian and NZ orders; PayPal Visa MasterCard Afterpay - Buy Now Pay Later ZipPay - Buy Now Pay Later International orders we only accept PayPal as payment method.
More From This Category

The S1 Lifer Helmet is one of the best fitting and safest helmets for Skateboarding, Longboarding, BMX and Roller Derby. The Lifer Helmet uses a specially formulated EPS Fusion Foam which allows it to protect your head from multiple low force impacts as well as high impacts. The Lifer Helmet is an AUS/NZ Certified "multi-impact" helmet and is up to 5x more protective than the soft foam non-certified helmets. The Lifer helmet is a breakthrough design combining the added safety of a CPSC and ASTM certified helmet with the comfort and fit of a non-certified helmet. The S1 Lifer Helmet is the best fitting High impact and Multiple Impact helmet on the market.
To ensure a perfect fit, measure the circumference of your head starting in the middle of your forehead and match it with the sizes below:
XS Lifer (20.5") 52.1cm
S Lifer (21”) 53.3cm
M Lifer (21.5”) 54.6cm
L Lifer (22”) 55.9cm
XL Lifer (22.5”) 57.2cm
XXL Lifer (23″) 58.4cm
XXXL Lifer (23.5″) 59.7cm

The S1 Lifer Helmet is one of the best fitting and safest helmets for Skateboarding, Longboarding, BMX and Roller Derby. The Lifer Helmet uses a specially formulated EPS Fusion Foam which allows it to protect your head from multiple low force impacts as well as high impacts. The Lifer Helmet is an AUS/NZ Certified "multi-impact" helmet and is up to 5x more protective than the soft foam non-certified helmets. The Lifer helmet is a breakthrough design combining the added safety of a CPSC and ASTM certified helmet with the comfort and fit of a non-certified helmet. The S1 Lifer Helmet is the best fitting High impact and Multiple Impact helmet on the market.
To ensure a perfect fit, measure the circumference of your head starting in the middle of your forehead and match it with the sizes below:
XS Lifer (20.5") 52.1cm
S Lifer (21”) 53.3cm
M Lifer (21.5”) 54.6cm
L Lifer (22”) 55.9cm
XL Lifer (22.5”) 57.2cm
XXL Lifer (23″) 58.4cm
XXXL Lifer (23.5″) 59.7cm

The S1 Lifer Helmet is one of the best fitting and safest helmets for Skateboarding, Longboarding, BMX and Roller Derby. The Lifer Helmet uses a specially formulated EPS Fusion Foam which allows it to protect your head from multiple low force impacts as well as high impacts. The Lifer Helmet is an AUS/NZ Certified "multi-impact" helmet and is up to 5x more protective than the soft foam non-certified helmets. The Lifer helmet is a breakthrough design combining the added safety of a CPSC and ASTM certified helmet with the comfort and fit of a non-certified helmet. The S1 Lifer Helmet is the best fitting High impact and Multiple Impact helmet on the market.
To ensure a perfect fit, measure the circumference of your head starting in the middle of your forehead and match it with the sizes below:
XS Lifer (20.5") 52.1cm
S Lifer (21”) 53.3cm
M Lifer (21.5”) 54.6cm
L Lifer (22”) 55.9cm
XL Lifer (22.5”) 57.2cm
XXL Lifer (23″) 58.4cm
XXXL Lifer (23.5″) 59.7cm

The S1 Lifer Helmet is one of the best fitting and safest helmets for Skateboarding, Longboarding, BMX and Roller Derby. The Lifer Helmet uses a specially formulated EPS Fusion Foam which allows it to protect your head from multiple low force impacts as well as high impacts. The Lifer Helmet is an AUS/NZ Certified "multi-impact" helmet and is up to 5x more protective than the soft foam non-certified helmets. The Lifer helmet is a breakthrough design combining the added safety of a CPSC and ASTM certified helmet with the comfort and fit of a non-certified helmet. The S1 Lifer Helmet is the best fitting High impact and Multiple Impact helmet on the market.
To ensure a perfect fit, measure the circumference of your head starting in the middle of your forehead and match it with the sizes below:
XS Lifer (20.5") 52.1cm
S Lifer (21”) 53.3cm
M Lifer (21.5”) 54.6cm
L Lifer (22”) 55.9cm
XL Lifer (22.5”) 57.2cm
XXL Lifer (23″) 58.4cm
XXXL Lifer (23.5″) 59.7cm

The S1 Lifer Helmet is one of the best fitting and safest helmets for Skateboarding, Longboarding, BMX and Roller Derby. The Lifer Helmet uses a specially formulated EPS Fusion Foam which allows it to protect your head from multiple low force impacts as well as high impacts. The Lifer Helmet is an AUS/NZ Certified "multi-impact" helmet and is up to 5x more protective than the soft foam non-certified helmets. The Lifer helmet is a breakthrough design combining the added safety of a CPSC and ASTM certified helmet with the comfort and fit of a non-certified helmet. The S1 Lifer Helmet is the best fitting High impact and Multiple Impact helmet on the market.
To ensure a perfect fit, measure the circumference of your head starting in the middle of your forehead and match it with the sizes below:
XS Lifer (20.5") 52.1cm
S Lifer (21”) 53.3cm
M Lifer (21.5”) 54.6cm
L Lifer (22”) 55.9cm
XL Lifer (22.5”) 57.2cm
XXL Lifer (23″) 58.4cm
XXXL Lifer (23.5″) 59.7cm