SKATEBOARDS
SCOOTERS
ACCESSORIES
APPAREL
PROTECTION
CLEARANCE
Brands
Carver Skateboard Complete Courtney Conlogue C7 Trucks Silver
Notify me when back in stock
Free Shipping Australia Wide Orders Over $99 Need Help? Customer Support (07) 5641-1535Completely assembled and ready to ride.
Courtney had been training on a Carver for several years before we sponsored her, so by the time we met about designing her model, she had plenty of ideas, from the shape and length to the graphic. Short and wide was her mantra, so she can practice maneuvers with great control and precision proportionate to her size. This premium skate features an eco-certified Walnut veneer bottom.
- 29.5" long
- 9 3/4" wide
- 6 1/8" tail
- 3 1/4" nose
- 16" wheelbase
What’s the difference between the C7 and the CX?
The C7 is Carver's signature surfskate front truck, stuff and it has an incredible amount of pump and turning radius. It has a spring loaded swing arm that allows the nose of the board to sway slightly from side to side, essentially allowing you to snap your turns from the tail and pump effortlessly for speed.
The CX is Carver's reverse-kingpin surfskate front truck, and it also has more pump and tighter turning than any other reverse kingpin truck on the market, but without any other parts. It has a similar feel to the C7 but is less extreme, so if you want a more familiar feel to your board but want to pump and surf, then the CX is the truck you want.
90 Day Returns Money Back Guarantee Afterpay & Zip Pay Shop Now, Take Now, Pay Later World Wide Shipping NZ, USA, Canada, UK, Europe, ASIA + More(CARVERCONLOGUEC7)
SHIPPING COSTS
AUSTRALIA
FREE SHIPPING on all orders over $99.
$8 FLAT RATE on all orders under $99.
Express Delivery from $10.
NEW ZEALAND EXPRESS COURIER
$10 FLAT RATE on all orders.
WORLDWIDE EXPRESS COURIER
$50 flat rate on all orders.
All orders are dispatched promptly after you place your order.
ESTIMATED DELIVERY TIMES
NSW - 1 to 4 working days ACT - 1 to 4 working days QLD - 1 to 4 working days VIC - 2 to 5 working days SA - 2 to 6 working days WA - 5 to 8 working days NT - 5 to 9 working days TAS - 5 to 9 working days NZ - 2 to 4 working days ASIA - 2 to 6 working days USA - 3 to 7 working days UK - 4 to 8 working days EURO - 4 to 8 working days
PAYMENT INFO
All payments are secure and protected by our sitewide HTTPS. We accept following payment methods for Australian and NZ orders; PayPal Visa MasterCard Bank Transfer Afterpay - Buy Now Pay Later ZipPay - Buy Now Pay Later International orders we only accept PayPal as payment method.
Kick Push exceeded our expectations! After reaching out to Liam and the team for advice around buying a custom build for a first time rider we got exactly what we wanted for the price we wanted.
Excellent service great products awesome prices with outstanding delivery arrangements. My purchase was for intestate delivery and arrived well before expectation. Thanks again Kickpush!!
One of the best places to buy skate board parts. Their wide range of selection of brands makes them a great website to purchase anything and their deliveries are faster than any others.
Fantastic experience l! Friendly staff on the phone and fast postage. Ordered online due to Covid-19 and Had the boards in no time! Highly recommend these guys :D
More From This Category
Completely assembled and ready to ride.
The 29” Swallow has been one of our favorite boards for years and a staple in the Carver quiver. This little board handles like it’s namesake, fast and loose. The combination of short and wide is magic, because the shorter wheelbase makes pumping this board on the flats just effortless, but the extra width and concave makes it a comfortable cruiser, too. The kick tail completes the versatility, giving you some needed pop for kick turns and crack-in-the-road hopping, explaining why it’s been one of the longest running designs in the Carver line. We’ve updated the graphic with one of surf-artist Ryan Kleiner’s hand painted waves, evoking exactly the feeling of looking through the eye of the tube. This board will work equally well with either the C7 or CX truck sets; the C7 set will give the board a more flowing performance with a great range of adjustability, the CX set will give the board a more snappy performance with a lighter frame.
- 29" long
- 9 5/8" wide
- 6 1/8" tail
- 3 3/4" nose
- 15 1/2" wheelbase
What’s the difference between the C7 and the CX?
The C7 is Carver's signature surfskate front truck, stuff and it has an incredible amount of pump and turning radius. It has a spring loaded swing arm that allows the nose of the board to sway slightly from side to side, essentially allowing you to snap your turns from the tail and pump effortlessly for speed.
The CX is Carver's reverse-kingpin surfskate front truck, and it also has more pump and tighter turning than any other reverse kingpin truck on the market, but without any other parts. It has a similar feel to the C7 but is less extreme, so if you want a more familiar feel to your board but want to pump and surf, then the CX is the truck you want.
NOTE: the photo we used of this board shows the C7 truck though you will receive board with truck listed in the title.
Completely assembled and ready to ride.
The 29” Swallow has been one of our favorite boards for years and a staple in the Carver quiver. This little board handles like it’s namesake, fast and loose. The combination of short and wide is magic, because the shorter wheelbase makes pumping this board on the flats just effortless, but the extra width and concave makes it a comfortable cruiser, too. The kick tail completes the versatility, giving you some needed pop for kick turns and crack-in-the-road hopping, explaining why it’s been one of the longest running designs in the Carver line. We’ve updated the graphic with one of surf-artist Ryan Kleiner’s hand painted waves, evoking exactly the feeling of looking through the eye of the tube. This board will work equally well with either the C7 or CX truck sets; the C7 set will give the board a more flowing performance with a great range of adjustability, the CX set will give the board a more snappy performance with a lighter frame.
- 29" long
- 9 5/8" wide
- 6 1/8" tail
- 3 3/4" nose
- 15 1/2" wheelbase
What’s the difference between the C7 and the CX?
The C7 is Carver's signature surfskate front truck, stuff and it has an incredible amount of pump and turning radius. It has a spring loaded swing arm that allows the nose of the board to sway slightly from side to side, essentially allowing you to snap your turns from the tail and pump effortlessly for speed.
The CX is Carver's reverse-kingpin surfskate front truck, and it also has more pump and tighter turning than any other reverse kingpin truck on the market, but without any other parts. It has a similar feel to the C7 but is less extreme, so if you want a more familiar feel to your board but want to pump and surf, then the CX is the truck you want.
NOTE: the photo we used of this board shows the C7 truck though you will receive board with truck listed in the title.
Completely assembled and ready to ride.
The 29” Swallow has been one of our favorite boards for years and a staple in the Carver quiver. This little board handles like it’s namesake, fast and loose. The combination of short and wide is magic, because the shorter wheelbase makes pumping this board on the flats just effortless, but the extra width and concave makes it a comfortable cruiser, too. The kick tail completes the versatility, giving you some needed pop for kick turns and crack-in-the-road hopping, explaining why it’s been one of the longest running designs in the Carver line. We’ve updated the graphic with one of surf-artist Ryan Kleiner’s hand painted waves, evoking exactly the feeling of looking through the eye of the tube. This board will work equally well with either the C7 or CX truck sets; the C7 set will give the board a more flowing performance with a great range of adjustability, the CX set will give the board a more snappy performance with a lighter frame.
- 29" long
- 9 5/8" wide
- 6 1/8" tail
- 3 3/4" nose
- 15 1/2" wheelbase
What’s the difference between the C7 and the CX?
The C7 is Carver's signature surfskate front truck, stuff and it has an incredible amount of pump and turning radius. It has a spring loaded swing arm that allows the nose of the board to sway slightly from side to side, essentially allowing you to snap your turns from the tail and pump effortlessly for speed.
The CX is Carver's reverse-kingpin surfskate front truck, and it also has more pump and tighter turning than any other reverse kingpin truck on the market, but without any other parts. It has a similar feel to the C7 but is less extreme, so if you want a more familiar feel to your board but want to pump and surf, then the CX is the truck you want.
NOTE: the photo we used of this board shows the C7 truck though you will receive board with truck listed in the title.
Completely assembled and ready to ride.
The 29” Swallow has been one of our favorite boards for years and a staple in the Carver quiver. This little board handles like it’s namesake, fast and loose. The combination of short and wide is magic, because the shorter wheelbase makes pumping this board on the flats just effortless, but the extra width and concave makes it a comfortable cruiser, too. The kick tail completes the versatility, giving you some needed pop for kick turns and crack-in-the-road hopping, explaining why it’s been one of the longest running designs in the Carver line. We’ve updated the graphic with one of surf-artist Ryan Kleiner’s hand painted waves, evoking exactly the feeling of looking through the eye of the tube. This board will work equally well with either the C7 or CX truck sets; the C7 set will give the board a more flowing performance with a great range of adjustability, the CX set will give the board a more snappy performance with a lighter frame.
- 29" long
- 9 5/8" wide
- 6 1/8" tail
- 3 3/4" nose
- 15 1/2" wheelbase
What’s the difference between the C7 and the CX?
The C7 is Carver's signature surfskate front truck, stuff and it has an incredible amount of pump and turning radius. It has a spring loaded swing arm that allows the nose of the board to sway slightly from side to side, essentially allowing you to snap your turns from the tail and pump effortlessly for speed.
The CX is Carver's reverse-kingpin surfskate front truck, and it also has more pump and tighter turning than any other reverse kingpin truck on the market, but without any other parts. It has a similar feel to the C7 but is less extreme, so if you want a more familiar feel to your board but want to pump and surf, then the CX is the truck you want.
NOTE: the photo we used of this board shows the C7 truck though you will receive board with truck listed in the title.
Completely assembled and ready to ride.
The 29” Swallow has been one of our favorite boards for years and a staple in the Carver quiver. This little board handles like it’s namesake, fast and loose. The combination of short and wide is magic, because the shorter wheelbase makes pumping this board on the flats just effortless, but the extra width and concave makes it a comfortable cruiser, too. The kick tail completes the versatility, giving you some needed pop for kick turns and crack-in-the-road hopping, explaining why it’s been one of the longest running designs in the Carver line. We’ve updated the graphic with one of surf-artist Ryan Kleiner’s hand painted waves, evoking exactly the feeling of looking through the eye of the tube. This board will work equally well with either the C7 or CX truck sets; the C7 set will give the board a more flowing performance with a great range of adjustability, the CX set will give the board a more snappy performance with a lighter frame.
- 29" long
- 9 5/8" wide
- 6 1/8" tail
- 3 3/4" nose
- 15 1/2" wheelbase
What’s the difference between the C7 and the CX?
The C7 is Carver's signature surfskate front truck, stuff and it has an incredible amount of pump and turning radius. It has a spring loaded swing arm that allows the nose of the board to sway slightly from side to side, essentially allowing you to snap your turns from the tail and pump effortlessly for speed.
The CX is Carver's reverse-kingpin surfskate front truck, and it also has more pump and tighter turning than any other reverse kingpin truck on the market, but without any other parts. It has a similar feel to the C7 but is less extreme, so if you want a more familiar feel to your board but want to pump and surf, then the CX is the truck you want.
NOTE: the photo we used of this board shows the C7 truck though you will receive board with truck listed in the title.
Completely assembled and ready to ride.
The 29” Swallow has been one of our favorite boards for years and a staple in the Carver quiver. This little board handles like it’s namesake, fast and loose. The combination of short and wide is magic, because the shorter wheelbase makes pumping this board on the flats just effortless, but the extra width and concave makes it a comfortable cruiser, too. The kick tail completes the versatility, giving you some needed pop for kick turns and crack-in-the-road hopping, explaining why it’s been one of the longest running designs in the Carver line. We’ve updated the graphic with one of surf-artist Ryan Kleiner’s hand painted waves, evoking exactly the feeling of looking through the eye of the tube. This board will work equally well with either the C7 or CX truck sets; the C7 set will give the board a more flowing performance with a great range of adjustability, the CX set will give the board a more snappy performance with a lighter frame.
- 29" long
- 9 5/8" wide
- 6 1/8" tail
- 3 3/4" nose
- 15 1/2" wheelbase
What’s the difference between the C7 and the CX?
The C7 is Carver's signature surfskate front truck, stuff and it has an incredible amount of pump and turning radius. It has a spring loaded swing arm that allows the nose of the board to sway slightly from side to side, essentially allowing you to snap your turns from the tail and pump effortlessly for speed.
The CX is Carver's reverse-kingpin surfskate front truck, and it also has more pump and tighter turning than any other reverse kingpin truck on the market, but without any other parts. It has a similar feel to the C7 but is less extreme, so if you want a more familiar feel to your board but want to pump and surf, then the CX is the truck you want.
NOTE: the photo we used of this board shows the C7 truck though you will receive board with truck listed in the title.
Completely assembled and ready to ride.
The 29” Swallow has been one of our favorite boards for years and a staple in the Carver quiver. This little board handles like it’s namesake, fast and loose. The combination of short and wide is magic, because the shorter wheelbase makes pumping this board on the flats just effortless, but the extra width and concave makes it a comfortable cruiser, too. The kick tail completes the versatility, giving you some needed pop for kick turns and crack-in-the-road hopping, explaining why it’s been one of the longest running designs in the Carver line. We’ve updated the graphic with one of surf-artist Ryan Kleiner’s hand painted waves, evoking exactly the feeling of looking through the eye of the tube. This board will work equally well with either the C7 or CX truck sets; the C7 set will give the board a more flowing performance with a great range of adjustability, the CX set will give the board a more snappy performance with a lighter frame.
- 29" long
- 9 5/8" wide
- 6 1/8" tail
- 3 3/4" nose
- 15 1/2" wheelbase
What’s the difference between the C7 and the CX?
The C7 is Carver's signature surfskate front truck, stuff and it has an incredible amount of pump and turning radius. It has a spring loaded swing arm that allows the nose of the board to sway slightly from side to side, essentially allowing you to snap your turns from the tail and pump effortlessly for speed.
The CX is Carver's reverse-kingpin surfskate front truck, and it also has more pump and tighter turning than any other reverse kingpin truck on the market, but without any other parts. It has a similar feel to the C7 but is less extreme, so if you want a more familiar feel to your board but want to pump and surf, then the CX is the truck you want.
NOTE: the photo we used of this board shows the C7 truck though you will receive board with truck listed in the title.
We Also Recommend
FREE DELIVERY AUSTRALIA WIDE
SHIPPING WITHIN AUSTRALIA ONLY
Please note some very remote areas of Australia we may not be able to ship to.
If you buy multiple ramps you will qualify for a discount, please call us to discuss a better deal!
Combo pieces together to make your own skatepark!
Get creative and practise your Grinds, Flip Tricks and Manuals to improve your technique
Features:
- Join 150 Wedge for effortless setup
- Perfect height for slappys
- Add second Manual Pad for longer manuals and land area
- Durable to lean on an angle
Specifications:
- L 1190 x W 590 x H 150
- 15-20 minutes build time
- All parts pre drilled
- 5mm hex bit, drill and safety gear required
- Delivered to you flat packed in cardboard box
- Built to a Skatepark standard (Certified by structural engineer, Earth
quake proof)
- Australian Made
Please note - These ramps are made to order and can take anywhere from 1 - 7 business days before dispatch.
FREE DELIVERY AUSTRALIA WIDE
SHIPPING WITHIN AUSTRALIA ONLY
Please note some very remote areas of Australia we may not be able to ship to.
If you buy multiple ramps you will qualify for a discount, please call us to discuss a better deal!
Combo pieces together to make your own skatepark!
Get creative and practise your Grinds, Flip Tricks and Manuals to improve your technique
Features:
- Join 150 Wedge for effortless setup
- Perfect height for slappys
- Add second Manual Pad for longer manuals and land area
- Durable to lean on an angle
Specifications:
- L 1190 x W 590 x H 150
- 15-20 minutes build time
- All parts pre drilled
- 5mm hex bit, drill and safety gear required
- Delivered to you flat packed in cardboard box
- Built to a Skatepark standard (Certified by structural engineer, Earth
quake proof)
- Australian Made
Please note - These ramps are made to order and can take anywhere from 1 - 7 business days before dispatch.
FREE DELIVERY AUSTRALIA WIDE
SHIPPING WITHIN AUSTRALIA ONLY
Please note some very remote areas of Australia we may not be able to ship to.
If you buy multiple ramps you will qualify for a discount, please call us to discuss a better deal!
Combo pieces together to make your own skatepark!
Get creative and practise your Grinds, Flip Tricks and Manuals to improve your technique
Features:
- Join 150 Wedge for effortless setup
- Perfect height for slappys
- Add second Manual Pad for longer manuals and land area
- Durable to lean on an angle
Specifications:
- L 1190 x W 590 x H 150
- 15-20 minutes build time
- All parts pre drilled
- 5mm hex bit, drill and safety gear required
- Delivered to you flat packed in cardboard box
- Built to a Skatepark standard (Certified by structural engineer, Earth
quake proof)
- Australian Made
Please note - These ramps are made to order and can take anywhere from 1 - 7 business days before dispatch.
