SKATEBOARDS
SCOOTERS
ACCESSORIES
APPAREL
PROTECTION
CLEARANCE
Brands
Carver Skateboard Complete Channel Islands Pod Mod Cx Trucks Silver
.png)
Free Shipping Australia Wide Orders Over $99Completely assembled and ready to ride.
Our collab surf/skate model with Channel Islands, the Pod Mod, is meant to be ridden wider and shorter, so we went with these characteristics and kept it on the shorter side, while giving it a bit fuller template for increased control rail-to-rail.
- 29.25" long
- 9 3/4" wide
- 6 1/8" tail
- 3 1/2" nose
- 15 1/2" wheelbase
What’s the difference between the C7 and the CX?
The C7 is Carver's signature surfskate front truck, stuff and it has an incredible amount of pump and turning radius. It has a spring loaded swing arm that allows the nose of the board to sway slightly from side to side, essentially allowing you to snap your turns from the tail and pump effortlessly for speed.
The CX is Carver's reverse-kingpin surfskate front truck, and it also has more pump and tighter turning than any other reverse kingpin truck on the market, but without any other parts. It has a similar feel to the C7 but is less extreme, so if you want a more familiar feel to your board but want to pump and surf, then the CX is the truck you want.
90 Day Returns Money Back Guarantee Afterpay & Zip Pay Shop Now, Take Now, Pay Later World Wide Shipping NZ, USA, Canada, UK, Europe, ASIA + More(CARVERPODMODCX)
SHIPPING COSTS
AUSTRALIA
FREE SHIPPING on all orders over $99.
$10 FLAT RATE on all orders under $99.
Express Delivery from $10.
NEW ZEALAND EXPRESS COURIER
$10 FLAT RATE or FREE SHIPPING on all orders over $199.
WORLDWIDE EXPRESS COURIER
$50 flat rate on all orders.
All orders are dispatched promptly after you place your order.
ESTIMATED DELIVERY TIMES
Delivery times below may be affected by delays due to Covid situation.
NSW - 1 to 4 working days ACT - 1 to 4 working days QLD - 1 to 4 working days VIC - 2 to 5 working days SA - 2 to 6 working days WA - 5 to 8 working days NT - 5 to 9 working days TAS - 5 to 9 working days NZ - 2 to 4 working days ASIA - 2 to 6 working days USA - 3 to 7 working days UK - 4 to 8 working days EURO - 4 to 8 working days
PAYMENT INFO
All payments are secure and protected by our sitewide HTTPS. We accept following payment methods for Australian and NZ orders; PayPal Visa MasterCard Afterpay - Buy Now Pay Later ZipPay - Buy Now Pay Later International orders we only accept PayPal as payment method.
Others Also Bought
Completely assembled and ready to ride.
Made with a shorter Hyperspoon mold for a deep-dish nose concave and full tail kick on a shorter wheelbase, this little-big-board features big, juicy 70mm Ecothane wheels for crazy grip and deep-railed carves.
Specs:
Length: 28"
Width: 9 5/8"
Wheelbase: 15 3/8"
Nose: 3 1/2"
Tail: 5 5/8"
70mm x 81a Ecothane Mag Aqua wheels
What’s the difference between the C7 and the CX?
The C7 is Carver's signature surfskate front truck, stuff and it has an incredible amount of pump and turning radius. It has a spring loaded swing arm that allows the nose of the board to sway slightly from side to side, essentially allowing you to snap your turns from the tail and pump effortlessly for speed.
The CX is Carver's reverse-kingpin surfskate front truck, and it also has more pump and tighter turning than any other reverse kingpin truck on the market, but without any other parts. It has a similar feel to the C7 but is less extreme, so if you want a more familiar feel to your board but want to pump and surf, then the CX is the truck you want.
Completely assembled and ready to ride.
Made with a shorter Hyperspoon mold for a deep-dish nose concave and full tail kick on a shorter wheelbase, this little-big-board features big, juicy 70mm Ecothane wheels for crazy grip and deep-railed carves.
Specs:
Length: 28"
Width: 9 5/8"
Wheelbase: 15 3/8"
Nose: 3 1/2"
Tail: 5 5/8"
70mm x 81a Ecothane Mag Aqua wheels
What’s the difference between the C7 and the CX?
The C7 is Carver's signature surfskate front truck, stuff and it has an incredible amount of pump and turning radius. It has a spring loaded swing arm that allows the nose of the board to sway slightly from side to side, essentially allowing you to snap your turns from the tail and pump effortlessly for speed.
The CX is Carver's reverse-kingpin surfskate front truck, and it also has more pump and tighter turning than any other reverse kingpin truck on the market, but without any other parts. It has a similar feel to the C7 but is less extreme, so if you want a more familiar feel to your board but want to pump and surf, then the CX is the truck you want.
Completely assembled and ready to ride.
We’re continuing our development of surf/skate pairings with the iconic Channel Islands Flyer, designed by Al Merrick. We’ve kept the slight rail bump at the tail, giving you a slightly wider back foot platform while keeping the overall template light and snappy, just like its namesake.
- 30.75" long
- 9 3/4" wide
- 6 1/8" tail
- 3 3/8" nose
- 16 3/4" wheelbase
What’s the difference between the C7 and the CX?
The C7 is Carver's signature surfskate front truck, stuff and it has an incredible amount of pump and turning radius. It has a spring loaded swing arm that allows the nose of the board to sway slightly from side to side, essentially allowing you to snap your turns from the tail and pump effortlessly for speed.
The CX is Carver's reverse-kingpin surfskate front truck, and it also has more pump and tighter turning than any other reverse kingpin truck on the market, but without any other parts. It has a similar feel to the C7 but is less extreme, so if you want a more familiar feel to your board but want to pump and surf, then the CX is the truck you want.
More From This Category
The Goodstock off white skateboard is a classic Resin-7 rock maple complete featuring ABEC-7 bearings, 5.0" Tensor alloy trucks, 52mm 99a wheels and matte finish.
8" x 31.63"
14" Wheel Base
The Goodstock off white skateboard is a classic Resin-7 rock maple complete featuring ABEC-7 bearings, 5.0" Tensor alloy trucks, 52mm 99a wheels and matte finish.
8" x 31.63"
14" Wheel Base
The Goodstock off white skateboard is a classic Resin-7 rock maple complete featuring ABEC-7 bearings, 5.0" Tensor alloy trucks, 52mm 99a wheels and matte finish.
8" x 31.63"
14" Wheel Base
The Goodstock off white skateboard is a classic Resin-7 rock maple complete featuring ABEC-7 bearings, 5.0" Tensor alloy trucks, 52mm 99a wheels and matte finish.
8" x 31.63"
14" Wheel Base
The Goodstock off white skateboard is a classic Resin-7 rock maple complete featuring ABEC-7 bearings, 5.0" Tensor alloy trucks, 52mm 99a wheels and matte finish.
8" x 31.63"
14" Wheel Base
We Also Recommend
Resin Hybrid Maple Construction.
7-ply 100% Hardrock & Canadian Maple with Epoxy Resin Glue.
Single Deck Press (Same shape and concave every time).
Width: 8.25"
Length: 32.1"
Wheelbase: 14.25"
Resin Hybrid Maple Construction.
7-ply 100% Hardrock & Canadian Maple with Epoxy Resin Glue.
Single Deck Press (Same shape and concave every time).
Width: 8.25"
Length: 32.1"
Wheelbase: 14.25"
Resin Hybrid Maple Construction.
7-ply 100% Hardrock & Canadian Maple with Epoxy Resin Glue.
Single Deck Press (Same shape and concave every time).
Width: 8.25"
Length: 32.1"
Wheelbase: 14.25"
Resin Hybrid Maple Construction.
7-ply 100% Hardrock & Canadian Maple with Epoxy Resin Glue.
Single Deck Press (Same shape and concave every time).
Width: 8.25"
Length: 32.1"
Wheelbase: 14.25"
Resin Hybrid Maple Construction.
7-ply 100% Hardrock & Canadian Maple with Epoxy Resin Glue.
Single Deck Press (Same shape and concave every time).
Width: 8.25"
Length: 32.1"
Wheelbase: 14.25"
