Apex Pro 4 Bolt Scooter SCS Clamp V3 Raw
The APEX Pro SCS is 78mm in height.
APEX SCS V3 weighs 255gms
This clamp predominantly runs SCS, but ICS can be run with this product.
Standard handle bars can be used with the SCS, Oversized handle bars can be used if the Alloy shim is removed.



(APEXCLAMPV3-RAW)
SHIPPING COSTS
AUSTRALIA
FREE SHIPPING on all orders over $99.
$10 FLAT RATE on all orders under $99.
Express Delivery from $10.
NEW ZEALAND EXPRESS COURIER
$10 FLAT RATE or FREE SHIPPING on all orders over $199.
WORLDWIDE EXPRESS COURIER
$50 flat rate on all orders.
All orders are dispatched promptly after you place your order.
ESTIMATED DELIVERY TIMES
Delivery times below may be affected by delays due to Covid situation.
NSW - 1 to 4 working days ACT - 1 to 4 working days QLD - 1 to 4 working days VIC - 2 to 5 working days SA - 2 to 6 working days WA - 5 to 8 working days NT - 5 to 9 working days TAS - 5 to 9 working days NZ - 2 to 4 working days ASIA - 2 to 6 working days USA - 3 to 7 working days UK - 4 to 8 working days EURO - 4 to 8 working days
PAYMENT INFO
All payments are secure and protected by our sitewide HTTPS. We accept following payment methods for Australian and NZ orders; PayPal Visa MasterCard Afterpay - Buy Now Pay Later ZipPay - Buy Now Pay Later International orders we only accept PayPal as payment method.
Others Also Bought
More From This Category

Affinity Classic XL Scooter Bars 710mm Oversized Midnight Teal
Features:
- SCS Compression for Standard & Oversized
- Shim & Starnut Included
- Hi Tensile M8 Allen Bolts
- 6061 Aluminium Alloy Construction
We Also Recommend

Completely assembled and ready to ride.
The rounded pin is the grandpappy of all shapes and the 70’s had its own take, such as the wider template towards the nose which here provides more front foot area for pushing and trimming in that retro, laid back style.
Specs:
Length: 31"
Width: 9 7/8"
Wheelbase: 17"
Nose: 3 1/2"
Tail: 6 3/8"
70mm x 78a Mag Smoke wheels
What’s the difference between the C7 and the CX?
The C7 is Carver's signature surfskate front truck, stuff and it has an incredible amount of pump and turning radius. It has a spring loaded swing arm that allows the nose of the board to sway slightly from side to side, essentially allowing you to snap your turns from the tail and pump effortlessly for speed.
The CX is Carver's reverse-kingpin surfskate front truck, and it also has more pump and tighter turning than any other reverse kingpin truck on the market, but without any other parts. It has a similar feel to the C7 but is less extreme, so if you want a more familiar feel to your board but want to pump and surf, then the CX is the truck you want.

Completely assembled and ready to ride.
The rounded pin is the grandpappy of all shapes and the 70’s had its own take, such as the wider template towards the nose which here provides more front foot area for pushing and trimming in that retro, laid back style.
Specs:
Length: 31"
Width: 9 7/8"
Wheelbase: 17"
Nose: 3 1/2"
Tail: 6 3/8"
70mm x 78a Mag Smoke wheels
What’s the difference between the C7 and the CX?
The C7 is Carver's signature surfskate front truck, stuff and it has an incredible amount of pump and turning radius. It has a spring loaded swing arm that allows the nose of the board to sway slightly from side to side, essentially allowing you to snap your turns from the tail and pump effortlessly for speed.
The CX is Carver's reverse-kingpin surfskate front truck, and it also has more pump and tighter turning than any other reverse kingpin truck on the market, but without any other parts. It has a similar feel to the C7 but is less extreme, so if you want a more familiar feel to your board but want to pump and surf, then the CX is the truck you want.

Completely assembled and ready to ride.
The rounded pin is the grandpappy of all shapes and the 70’s had its own take, such as the wider template towards the nose which here provides more front foot area for pushing and trimming in that retro, laid back style.
Specs:
Length: 31"
Width: 9 7/8"
Wheelbase: 17"
Nose: 3 1/2"
Tail: 6 3/8"
70mm x 78a Mag Smoke wheels
What’s the difference between the C7 and the CX?
The C7 is Carver's signature surfskate front truck, stuff and it has an incredible amount of pump and turning radius. It has a spring loaded swing arm that allows the nose of the board to sway slightly from side to side, essentially allowing you to snap your turns from the tail and pump effortlessly for speed.
The CX is Carver's reverse-kingpin surfskate front truck, and it also has more pump and tighter turning than any other reverse kingpin truck on the market, but without any other parts. It has a similar feel to the C7 but is less extreme, so if you want a more familiar feel to your board but want to pump and surf, then the CX is the truck you want.